home
BETA 7978E XS Blue Waterproof Jacket-Lined with T190 polyester,Convenient and comfortable fit,Metal zip closure,Equipped with a fixed hood,Large front pockets with zipclosure.
KING TONY M5 1/2' XZN® Bit Socket 80mm
Available
KT402605
- DIN 3120;
- Socket made by chrome vanadium alloy steel;
- Bit made by silicon alloy steel (S2);
- Polished, chrome plated.
- Socket made by chrome vanadium alloy steel;
- Bit made by silicon alloy steel (S2);
- Polished, chrome plated.
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference KT402605 | |||||||||
KING TONY M5 1/2' XZN® Bit Socket 80mm |
|||||||||
|
Description- DIN 3120; |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
home
CHEMITOOL BY PAYPER T-Shirt 140/150GR Print White XXL- 100% cotton.
- Round neck.
- Short sleeves.
- Round neck.
- Short sleeves.
home
DASSY Dusseldorf High Visibility Work Jacket S +/- 290 g/m² Fluo Yellow/Grey'- High visibility work jacket.
- Highly visible at work with this high vis work jacket. Count on a certified protection class 3* thanks to fluorescent main fabricand the reflective tape.
- PESCO 74 - HIVIS FABRIC, +/- 290g/m²
- Highly visible at work with this high vis work jacket. Count on a certified protection class 3* thanks to fluorescent main fabricand the reflective tape.
- PESCO 74 - HIVIS FABRIC, +/- 290g/m²
caconete-redondo-din-en-22568-hss
RUKO Runner M DIN EN 22568 HSS - Cut To Right, Rectified (M3)- Main application Steel (N / mm²) <800, aluminum, brass and plastics
- Secondary application Bronze and cast iron
- Secondary application Bronze and cast iron
din-97-parafuso-cabeca-de-embeber
CHEMITOOL FASTENERS Slotted Countersunk Head Wood Screw DIN 97 4,5X45 4.8...- Slotted Countersunk Head Wood Screw White Zinc plated;
- DIN 97;
- Material: 4.8;
- Finishing: White Zinc plated.
- DIN 97;
- Material: 4.8;
- Finishing: White Zinc plated.
sbd-spare-parts
ROLETE/ROLDANA
home
STAHLWILLE Socket 1/2' nº 51 16 mmExtra deep, metric sizes: DIN 3124/ISO 2725-1, E DIN EN 3710, E DIN EN 3709, ASME B 107.5M, American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E, HPQ® high performance steel, chrome plated.
fresas-para-aluminio-curta
CHEMITOOL CUTTING Ø10x80/15-Ø10mm Co8 Short HSS End Mill Cutters for...- Excellent quality/value ratio;
- High-Speed Stel M35 5% Co and M42 8% Co;
- Fully rectified;
- High material removal capacity;
- Short and long version;
- Resistant to breakage;
- Long tool life.
- High-Speed Stel M35 5% Co and M42 8% Co;
- Fully rectified;
- High material removal capacity;
- Short and long version;
- Resistant to breakage;
- Long tool life.
home
KING TONY 1/4' T8H RESISTORX® Bit Socket 37mm- DIN 3120;
- Bit socket made from silicon alloy steel (S2);
- Polished, chrome plated.
- Bit socket made from silicon alloy steel (S2);
- Polished, chrome plated.
home
PUMA Borneo Black Mid S3 HRO SRC Boots nº 42The Scuff Caps series is one of the most successful safety shoe concepts, specially designed and developed for the construction sector, mechanical engineering and industry.
lima-de-precisao-triangular
LIMA 2407 180 MM H0
home
STARRETT Magnetic Base with Flex-O-Post Rod- Flex-O-Post.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
home
KRAFFT 400g Lubekrafft K2 Plex High Performance Grease for Bearings with MoS2Excellent resistance to high loads.