home
ANi Male Threaded Swivelling Elbow Fitting 50/CG M 1/8 M ø 4 mm- Conical male thread ISO 7 (BSPT)- DIN 2999- BS 21 with PTFE.
KING TONY 3/4' 6 Points Impact Bits Adapter 22mm
Ready to Ship
KT609622M
- 6 Points impact bits adapter;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
Buy more
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference KT609622M | |||||||||
KING TONY 3/4' 6 Points Impact Bits Adapter 22mm |
|||||||||
|
Description- 6 Points impact bits adapter; |
||||||||
PRODUCT DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
home
KING TONY T55H 1/2' RESISTORX® Bit Socket 60mm- DIN 3120;
- Socket made by chrome vanadium alloy steel;
- Bit made by silicon alloy steel (S2);
- Polished, chrome plated.
- Socket made by chrome vanadium alloy steel;
- Bit made by silicon alloy steel (S2);
- Polished, chrome plated.
home
STAHLWILLE 3/8' Screwdriver Socket with XZN® Screw, Extra Long nº 49X Size M8For tri-square socket head screws (XZN®), extra long, DIN 2324, Chrome Alloy Steel, chrome plated.
home
MILWAUKEE 450xTCT 2.1 Tpi Abrasive Materials/Fibreglass Sawzall blades- Special applications : cast iron / fibreglass.
home
STAHLWILLE Combination spanners OPEN-BOX 26 mmDIN 3113 form A/ISO 7738 form A (metric sizes), Chrome Alloy Steel, chrome plated.
home
MILWAUKEE HSS-R Drill Bits Set (19pc)- Genuine MILWAUKEE accessories;
- Contents: ø 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 mm;
- Supplied in: Metal case;
- High speed steel rollforged metal drill bits produced according to DIN 338;
- Oxide coating enables quick swarf removal;
- Normal point shaped cutting tip with 118° angle;
- Type N flute normal angle;
- Suitable for drilling in steel, cast iron, alloyed and non-alloyed material up to 800 N/mm².
- Contents: ø 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 mm;
- Supplied in: Metal case;
- High speed steel rollforged metal drill bits produced according to DIN 338;
- Oxide coating enables quick swarf removal;
- Normal point shaped cutting tip with 118° angle;
- Type N flute normal angle;
- Suitable for drilling in steel, cast iron, alloyed and non-alloyed material up to 800 N/mm².