KING TONY Interchangeable Tip for 7842 Hammer 75° 28mm
Ready to Ship
KT91528S
-Interchangeable tip for 7842 75° soft face hammer 28mm.
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference KT91528S | |||||||
KING TONY Interchangeable Tip for 7842 Hammer 75° 28mm |
|||||||
|
Description-Interchangeable tip for 7842 75° soft face hammer 28mm. |
||||||
PRODUCTS DATA
|
|||||||
SPECIFICATIONS
|
|||||||
16 other products in the same category:
home
KING TONY 3/16' 6 Points Impact Bit Socket 60mm- Impact bit socket - hexagon head;
- ANSI/ASME B107.2;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- ANSI/ASME B107.2;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
cutting-tools
PFERD Abrasive Spiral Bands Zirconia Alumina Z-COOL G36 60 x 30 mm- For coarse grinding work with a high stock removal rate and cool grinding.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Zirconia alumina Z-COOL.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Zirconia alumina Z-COOL.
din-7991-parafuso-cabeca-de-embeber
CHEMITOOL FASTENERS Hexagon Socket Cap Screw Countersunk Head DIN 7991 M8X45...- Hexagon Socket Cap Screw Countersunk Head Passivated Stainless Steel;
- DIN 7991;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 7991;
- Material: A2;
- Finishing: Passivated Stainless Steel.
home
KING TONY Nut Setter 12mm 100mm- Nut Setter, chrome vanadium alloy steel;
- Ideal for screwguns;
- Anti-rust oiled, sand-blasted;
- DIN 3126.
- Ideal for screwguns;
- Anti-rust oiled, sand-blasted;
- DIN 3126.
home
KING TONY Nut Setter 6mm 65mm- Nut Setter, chrome vanadium alloy steel;
- Ideal for screwguns;
- Anti-rust oiled, sand-blasted;
- DIN 3126.
- Ideal for screwguns;
- Anti-rust oiled, sand-blasted;
- DIN 3126.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M20X60 10.9 Plain- Hexagon Head Bolt Partial Thread Plain;
- DIN 931;
- Material: 10.9;
- Finishing: Plain.
- DIN 931;
- Material: 10.9;
- Finishing: Plain.
fasteners-and-fixings
CHEMITOOL FASTENERS Slotted Round Head Wood Screw DIN 96 N23 5,5X35 Brass- Slotted Raised Countersunk Head Wood Screws Brass;
- DIN 96;
- Finishing: Brass.
- DIN 96;
- Finishing: Brass.
home
PFERD Polinox Unitized Discs PNER Disc PNER-MW 115-22,2 SiC F- POLINOX unitized discs are used for face- down grinding on speed- adjustable angle grinders.
- Especially well- suited to work on larger surfaces.
- The compressed, non-woven material is bonded to a glass-fabric base.
- Abrasive: Silicon carbide (SiC).
- Especially well- suited to work on larger surfaces.
- The compressed, non-woven material is bonded to a glass-fabric base.
- Abrasive: Silicon carbide (SiC).
small-angle-grinders
DeWalt 18V XR 125mm Brushless Angle GrinderBrushless 18V motor;
-Electronic brake that stops the disc quickly when the trigger is released;
-Electronic clutch that reduces the kickback reaction in the event of a jam or stop.
-Electronic brake that stops the disc quickly when the trigger is released;
-Electronic clutch that reduces the kickback reaction in the event of a jam or stop.
cut-protection-gloves
CHEMITOOL SAFETY Polyurethane-coated Dyneema Glove Size 10- Galga 13.
- Seamless support.
- Coated on palm and fingertips.
- Elasticated cuff.
- Airy back.
- Great resistance to cutting and abrasion.
- Seamless support.
- Coated on palm and fingertips.
- Elasticated cuff.
- Airy back.
- Great resistance to cutting and abrasion.
