KING TONY emerged in 1976 and still maintains high-quality standards, consistently exceeding the requirements of the world's most demanding standards such as DIN (German) and ANSI (USA). The King Tony range of workshop tools includes solutions for almost every workshop need, including socket wrenches, impact wrenches, hammers, wrench sets, among others.
KING TONY emerged in 1976 and still maintains high-quality standards, consistently exceeding the requirements of the world's most demanding standards such as DIN (German) and ANSI (USA). The King Tony range of workshop tools includes solutions for almost every workshop need, including socket wrenches, impact wrenches, hammers, wrench sets, among others.
- For coarse grinding work with a high stock removal rate and a long tool life. - Abrasive: Zirconia alumina Z. - Recommendations for use: Use with hard or medium-hard COMBIDISC abrasive disc holders.
- The 3-edged geometry with spiral grooves allows for extremely high stability of the Solid 3 drill bit and thus prevents the danger of edging due to excessive overloading or jamming of the chips. - Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs. - Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced. - Solid 3 is easier to polish later than cranial drills of the same diameter.
- Excellent quality/value ratio; - Easy to use; - DIN 376; - Type B; - Available in blue ring and green ring; - Fully rectified; - Resistant to breakage; - Thread: M20; - Material: HSSE-G 5% Cobalto.
- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. - Consistently high performance due to self-sharpening ceramic oxide grain. - Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding. - Abrasive: Ceramic oxide grain CO-COOL.
