KING TONY PHILLIPS® PH1 65mm Reversible Blade 1300P
Available
KT136501P
- 1/4 PHILLIPS® reversible blade - long head type;
- DIN ISO 2351-2;
- Silicon chrome vanadium alloy steel (S2);
- Nickel plated;
- Magnetic.
- DIN ISO 2351-2;
- Silicon chrome vanadium alloy steel (S2);
- Nickel plated;
- Magnetic.
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference KT136501P | |||||||||
KING TONY PHILLIPS® PH1 65mm Reversible Blade 1300P |
|||||||||
|
Description- 1/4 PHILLIPS® reversible blade - long head type; |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
folha-de-lixa-metal
(UN) FOLHA LIXA METAL FLEX 230x280 P50spare-parts
AMORTECEDOR
home
CHEMITOOL BY PAYPER Trousers POWER STRETCH Black S- 98 % cotton + 2 % elastane.
- Reinforced triple stitching between legs.
- Pocket for meter.
- Side pocket with LOCK SYSTEM zip.
- Reinforced triple stitching between legs.
- Pocket for meter.
- Side pocket with LOCK SYSTEM zip.
home
KING TONY 3/4' 6 Points Metric Deep Impact Socket 3/4' 44mm- Intern 6 points metric deep impact socket;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
din-127b-anilha-de-mola
CHEMITOOL FASTENERS Spring Lock Washer DIN 127B M22 White Zinc plated-Spring Washer DIN 127B M22 140HV 4.8 Zinc-plated White.
fita-de-serra-para-metal
CHEMITOOL Power Saw Band M42C 4970X34X1,1 Z3/4PADVANTAGES
- 8% Co teeth (M42);
- High cutting performance;
- Width from 06 to 80mm;
- Thickness from 0,6 to 1,6mm;
- Uniform welding;
- Resistance to breakage;
- Long tool life.
- 8% Co teeth (M42);
- High cutting performance;
- Width from 06 to 80mm;
- Thickness from 0,6 to 1,6mm;
- Uniform welding;
- Resistance to breakage;
- Long tool life.
escovas-de-carvao
ESCOVA CARVAO 230V
sds-plus-hammer-drill-2-cutters
BROCA SDS 18X250
home
PFERD Combidisc Non-Woven Discs Hard CDR M180 50 mm- Suitable for universal work on small and medium-sized metal surfaces, e.g. removing rough grinding traces, removing oxidation andlight deburring work.
- Achieve matt and satin-finished surfaces.
- Abrasive: Aluminium oxide A.
- Achieve matt and satin-finished surfaces.
- Abrasive: Aluminium oxide A.
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Type N, HSS-G Dark (Ø 4,40mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
home
STARRETT Magnetic Base with Flex-O-Post Rod- Flex-O-Post.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.