KING TONY 5/16' PHILLIPS® PH3 36mm Bit
Ready to Ship
KT183603P
- PHILLIPS® Bit;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, sand-blasted.
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, sand-blasted.
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference KT183603P | |||||||||
KING TONY 5/16' PHILLIPS® PH3 36mm Bit |
|||||||||
|
Description- PHILLIPS® Bit; |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
lv-999-parafuso-aroscante-madeiras-duras
CHEMITOOL FASTENERS Countersunk Head Screw for Passivated Wood Particle Board...-Helical tip from the end of the thread, allowing a better displacement in the wood during screwing and increasing the final adhesion.
-Threading thread 40º and optimized pitch for a smooth but fast penetration.
-25º tip, which allows easy centring and drilling even in harder woods.
-Threading thread 40º and optimized pitch for a smooth but fast penetration.
-25º tip, which allows easy centring and drilling even in harder woods.
twist-drill-din-340-n-hss-g
CHEMITOOL CUTTING 334X185MM Ø33 DIN345 HSS-G Morse Taper Spiral Fully Ground...- Fully ground;
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
twist-drill-din-338-n-hss-g
RUKO Spiral Bits Disassembly DIN 338 Type N, HSS-R (Ø 18,50mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Brass and Bronze
- Secondary use Brass and Bronze
abracadeiras-de-serrilha
CHEMITOOL FASTENERS Nylon Cable Tie Black LV094 3,6X200mm- Round Pipe Clamp with Screw Black;
- LV094;
- Material: LV094;
- Finishing: Black.
- LV094;
- Material: LV094;
- Finishing: Black.
twist-drill-din-338-n-hss-g
CHEMITOOL CUTTING 133X87MM Ø10,25 DIN338 HSS-G BLACKLABEL Spiral Fully Ground...- High Speed Steel M2;
- Fully ground;
- High drilling performance;
- Available from 1,0 to 16mm diameter;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Material: High Speed Steel M2;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
- Fully ground;
- High drilling performance;
- Available from 1,0 to 16mm diameter;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Material: High Speed Steel M2;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
home
IRWIN SPEEDHAMMER POWER Construction Bit Ø8 mm/260 mm- Double carbide tip;
- Optimized tip design with double cutting edge;
- Geometry of the spiral maximized;
- Top-grade steel;
- Blue ring;
- Optimized slot design.
- Optimized tip design with double cutting edge;
- Geometry of the spiral maximized;
- Top-grade steel;
- Blue ring;
- Optimized slot design.
broca-cilindrica-helicoidal-centrar
CHEMITOOL CUTTING 140x90mm Ø11 DIN7487 Wood Spiral Drill Bit- Excellent quality/value ratio;
- Good drilling performance;
- Available from 3,0 to 24mm diameter;
- Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: Carbon steel;
- Suitable for: Wood, wood composites;
- Compatible machine: Portable drill, bench drill.
- Good drilling performance;
- Available from 3,0 to 24mm diameter;
- Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: Carbon steel;
- Suitable for: Wood, wood composites;
- Compatible machine: Portable drill, bench drill.
broca-retificada-36-hsse-co-5-ambar
RUKO Spiral Bits DIN 338 Type VA, HSSE-Co5 (Ø 2,60mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics
- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics
home
PFERD Combidisc Abrasive Discs Ceramic Oxide Grain CO-COOL CDR G36 75 mm- Exceptionally well-suited to surface and edge grinding.
- The fibre backing strengthens the abrasive disc and improves stock removal.
- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
- The fibre backing strengthens the abrasive disc and improves stock removal.
- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
