PFF 115 CO-FREEZE 80 SG INOX

- Genuine MILWAUKEE accessories;
- Core cutters for rotary hammers up to 4 kg;
- All TCT cores have a M16 x 2 thread and fit to both SDS-Plus and Hex 11 arbors;
- Arbor and pilot drill bit required additionally;
- Made in Germany;
- Not suitable for reinforced concrete.

- Exceptionally suitable for work on wear- resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
- Abrasive: Diamond.

SAE AS 954-E (test loads), ASME B 107.1, AS-drive and HPQ® high performance steel up to size 1 1/2, chrome plated.

- Particularly suitable for deburring and cleaning pipes, threads,
coupling sleeves and cylinders.
In addition to a thread, some versions also have a shank:
- M6 thread: 6 mm shank;
- 3/8 thread: 10 mm shank.

For aggressive grinding with the highest stock removal rates on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL

-This product is made of high quality materials to serve you for years to come.

- Aluminiun body and lightweigth construction die grinders (straight type);
- Cylinder and rotor construction of high quality steel;
- Low air comsumption.

- Rectified four-sided hard metal tip;
- Super deep double groove;
- Reduced groove;
- Vanadium chrome steel body;
- The coolant should always be used.

- 6-Point Nutspinner with round shank, chemical and oil resistant;
- Shank material - chrome vanadium alloy steel;
- Grip material - PP + TPR;
- Finishing - chrome plated.

- Genuine MILWAUKEE accessories;
- Manufactured from HSS steel for increased lifetime;
- Suitable for drilling through holes in wood, plasterboard and metal channel;
- Manufactured according to DIN 7490 and conforming to the German Employer´s Liability Insurance Association in terms of safety requirements for the building trade;
- Made in Germany.

DIN 3123/ISO 3316.