STAHLWILLE BITS Screwdriver for Slotted Screws 1 x 5,5 mm
Available
S08070026
DIN 3127/ISO 2351, for slotted screws.
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference S08070026 | |||||||
STAHLWILLE BITS Screwdriver for Slotted Screws 1 x 5,5 mm |
|||||||
|
DescriptionDIN 3127/ISO 2351, for slotted screws. |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
interruptores
INTERRUPTOR
din-571-parafuso-cabeca-sextavada
CHEMITOOL FASTENERS Hexagonal Head Choach Screw DIN 571 6X100 4.8 White Zinc...- Hexagonal Head Choach Screw White Zinc plated;
- DIN 571;
- Material: 4.8;
- Finishing: White Zinc plated.
- DIN 571;
- Material: 4.8;
- Finishing: White Zinc plated.
home
KING TONY 15/16'x1' Inch Open End Wrench-Flat flat slim fixed key.
-Tool in inches.
-Made from chrome vanadium steel.
-Tool in inches.
-Made from chrome vanadium steel.
lamela-de-nucleo-para-metal
CHEMITOOL CUTTING Ø150x25,4/30mm A120 Aluminium Oxide A Flap Wheel- Flexibility;
- Excellent adaptation to the workpiece edges;
- Highly resistant;
- Long tool life;
- Abrasive: Aluminium Oxide A;
- Suitable for: Steel, Cast Steel, Cast Iron;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders and Bench Grinders.
- Excellent adaptation to the workpiece edges;
- Highly resistant;
- Long tool life;
- Abrasive: Aluminium Oxide A;
- Suitable for: Steel, Cast Steel, Cast Iron;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders and Bench Grinders.
concrete-screw-countersunk-head
CHEMITOOL FASTENERS Flat Head Concrete Screw TORX Recess LV085 7,5x152 White...
cutting-tools
PFERD Combidisc Abrasive Discs Silicon Carbide SiC CDR G120 50 mm- For universal grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics.
- Particularly recommended for use on titanium alloys.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Abrasive: Silicon carbide SiC.
- Particularly recommended for use on titanium alloys.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Abrasive: Silicon carbide SiC.
home
PFERD Polifan Flap Discs Special Line Steel/Inox Type SGP Zirkon-Corner PFC...- Special tool with high stock removal rates for grinding work on fillet welds and angles which are hard to reach.
- Abrasive: Zirconia alumina Z.
- Grit size: 40.
- Materials to be worked: Steel, stainless steel (INOX).
- Applications: Work on fillet welds and angles.
- Abrasive: Zirconia alumina Z.
- Grit size: 40.
- Materials to be worked: Steel, stainless steel (INOX).
- Applications: Work on fillet welds and angles.
catrabucha-com-haste-arame-ondulado
CHEMITOOL PROBRUSH Circular Brush Crimped Steel Shaft 50mm- 0,5mm crimped steel;
- Available in 50, 75 and 100mm diameter;
- Fine finish;
- Ideal for corners;
- High profitability;
- Long tool life.
- Available in 50, 75 and 100mm diameter;
- Fine finish;
- Ideal for corners;
- High profitability;
- Long tool life.
