SOMTA 15˚ Spiral Machine Tap ISO529 M5

- For coarse grinding work with a high stock removal rate and a long tool life.
- Abrasive: Zirconia alumina Z.
- Recommendations for use: Use in the case of a higher contact pressure.

For inside TORX® screws, extra long, with ball end on long arm, swivel angle up to 25° each side, Chrome Vanadium, gunmetal finish.

-Material - chrome molybdenum steel alloy.
-Finishing - sunk phosphate.
-Adapter DR. of 3/4 and with sphere.

Degreaser for heavy dirt.

- Characteristics:
- Li-ion battery that keeps more than 80% of its charge for more than 90 days while inactive. There is no need to reload the unit before each use.
- 18V system, wireless power and convenience.

- T - handle wrench, 6 Point for hexagon head screw;
- The handle pin can be removed for another wrench;
- Material - Chrome vanadium steel;
- Finishing - chrome plated.

- Made of stainless steel with a satin finish - rust and stain resistant.
- The handle contains two channels allowing the gauges to be clamped at 30° or 45°, square in the channel or tilted to one side.
- The holder is 100mm (4) long providing good reach and balance.
- Set is supplied in a slim case which Provides protection and makes selecting the right gauge gauge for each job easy and instantaneous.
- Consists of Sets No. 167MAH and No. 167MB Combined, with Handle.

Special polish, without silicone, based on high quality waxes and controlled abrasives. Especially suitable for the professional body builder. It does not cause problems in the painting process because it does not contain silicones. Easy to apply and excellent results. It is used in the polishing and finishing of paint.