cutting-tools
DeWalt Angle Grinder Velcro Polishing Bonnet 180mm- Polishing with angle grinder Ø180mm Velcro.
SOMTA Fluteless Tap DIN371 HSSEV3 Yellow M5
Ready to Ship
5120500
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 5120500 | |||||||||
SOMTA Fluteless Tap DIN371 HSSEV3 Yellow M5 |
|||||||||
|
Description |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
home
CHEMITOOL BY PAYPER Unisex Trousers Multi Pockets Grey M- 100% cotton.
- Triple stitching on legs.
- Pocket for tape measure.
- Side pocket with LOCK SYSTEM closure.
- Reflective tapes on the back pocket.
- Triple stitching on legs.
- Pocket for tape measure.
- Side pocket with LOCK SYSTEM closure.
- Reflective tapes on the back pocket.
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 5,90mm)- Main application Steel (N / mm²) <900 and cast iron
- Secondary application Brass and bronze
- Secondary application Brass and bronze
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M30X100 8.8 Hot...- Hexagon Head Bolt Partial Thread Hot Dip Galvanized;
- DIN 931;
- Material: 8.8;
- Finishing: Hot Dip Galvanized.
- DIN 931;
- Material: 8.8;
- Finishing: Hot Dip Galvanized.
tungsten-carbide-burr-d-ball-kud
FRESA TUNGS. KUD 0807/6 ZALU PBall-shaped burr according to DIN 8032.
polidora-angular
STANLEY FATMAX V20 18V Polisher
home
STARRETT 167 Radius or Fillet Gauge Combined With Holder- Made of stainless steel with a satin finish - rust and stain resistant.
- The handle contains two channels allowing the gauges to be clamped at 30° or 45°, square in the channel or tilted to one side.
- The holder is 100mm (4) long providing good reach and balance.
- Set is supplied in a slim case which Provides protection and makes selecting the right gauge gauge for each job easy and instantaneous.
- Consists of Sets No. 167MAH and No. 167MB Combined, with Handle.
- The handle contains two channels allowing the gauges to be clamped at 30° or 45°, square in the channel or tilted to one side.
- The holder is 100mm (4) long providing good reach and balance.
- Set is supplied in a slim case which Provides protection and makes selecting the right gauge gauge for each job easy and instantaneous.
- Consists of Sets No. 167MAH and No. 167MB Combined, with Handle.
home
PFERD Coated Abrasives Cloth-Backed Sheets BR G240The brown cloth-backed variant is suitable for universal, heavy-duty use on alloyed and non-alloyed steels, as well as non-ferrous metals.
- The cloth-backed abrasive sheets comply with ISO 21948.
- The cloth-backed abrasive sheets comply with ISO 21948.
machine-tap-m-din-376-hss-c
CHEMITOOL CUTTING M22 Machine Tap DIN376 – Type B HSS-G M2- Excellent quality/value ratio;
- Easy to use;
- DIN 376;
- Type B;
- Available in blue ring and green ring;
- Fully rectified;
- Resistant to breakage;
- Thread: M22;
- Material: HSS-G M2.
- Easy to use;
- DIN 376;
- Type B;
- Available in blue ring and green ring;
- Fully rectified;
- Resistant to breakage;
- Thread: M22;
- Material: HSS-G M2.