Datasheet \ Reference 1010880 | |||||||||
SOMTA Drill DIN338 HSS Ø 8,8 mm |
|||||||||
Description |
|||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
16 other products in the same category:
home
PEDRO POLIMENTO PFB 1156030 CU 120 PURThe rhomboidal shape even enables work to be effortlessly performed on hard-to-reach places such as corners;
-With a diamond cut-off wheel, the blocks can be minimized and adapted to the respective application as required.
-With a diamond cut-off wheel, the blocks can be minimized and adapted to the respective application as required.
home
MILWAUKEE HSS-G Metal Drill Bits - Short - DIN 1897 HSSGS 4 x 55 - 10 pcs- Genuine MILWAUKEE accessories;
- Drill bit quality: High quality high speed steel;
- Tip geometry: Split Point DIN 1412 C;
- Point angle: 135°. Tolerance: h8;
- Flute / Helix angle: Type N flute and normal 20 - 30° angle;
- Right hand cutting edge. Surface / Colour: Polished silver;
- Withstands high drill point pressure due to short overall length;
- Excellent concentricity. Polished type N flute with right hand cutting edge, eliminates binding for faster chip removal and faster cutting with less effort;
- Application: Most suited for drilling sheet and thin walled materials;
- Suitable for drilling in sheet steel, thin alloyed and non-alloyed material up to 900 N/mm²;
- Also suitable for wood and plastics.
- Drill bit quality: High quality high speed steel;
- Tip geometry: Split Point DIN 1412 C;
- Point angle: 135°. Tolerance: h8;
- Flute / Helix angle: Type N flute and normal 20 - 30° angle;
- Right hand cutting edge. Surface / Colour: Polished silver;
- Withstands high drill point pressure due to short overall length;
- Excellent concentricity. Polished type N flute with right hand cutting edge, eliminates binding for faster chip removal and faster cutting with less effort;
- Application: Most suited for drilling sheet and thin walled materials;
- Suitable for drilling in sheet steel, thin alloyed and non-alloyed material up to 900 N/mm²;
- Also suitable for wood and plastics.
home
PPFERD Coated Abrasives Short Belts Ceramic Oxide Grain CO-COOL G80 16 x 480 mmFor aggressive grinding with the highest stock removal rates on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL
home
STAHLWILLE Extra Long TORX® Screwdriver DRALL Size T30For inside TORX® screws, extra long, Chrome Alloy Steel, chrome plated, black tips.