SOMTA Tools produces and trades standard and custom tools for the industrial and do it yourself markets. It presents a varied range of products manufactured in different sizes and materials (HSS and solid carbide). Its drills, cutters, reamers and threading tools also have coatings that help to prolong the equipment's durability.
SOMTA Tools produces and trades standard and custom tools for the industrial and do it yourself markets. It presents a varied range of products manufactured in different sizes and materials (HSS and solid carbide). Its drills, cutters, reamers and threading tools also have coatings that help to prolong the equipment's durability.
- Extroardinary cutting capacity: H 100mm at 0° and 45°; - Upper straight edge with dual front and read fixing; - Working table of maximum dimensions; - Micrometric adjustment of the working table height; - Adicional mobile support for cutting small pieces; - Movement on bearings of the turning table and swivel joint.
'- High visibility work trousers with knee pockets. - Highly visible at work with these high vis work trousers with knee pockets. Count on a certified protection class 2 thanks to fluorescent main fabric and the reflective tape. - PESCO 74 - HIVIS FABRIC, +/- 290 G/M²
- Resistant to weathering and U.V. rays. - Excellent adhesion on various types of substrates. - Can be applied on damp surfaces. - Paintable after drying. - Is odourless and isocyanate free. - Non-corrosive when boning to metal. - Permanent elasticity and excellent adhesion. - Interior and exterior use. - No shrinkage. - Remains flexible at low (-40°C) and high (+90°C) temperatures. - Ecological (no solvents or isocyanates). - It is permeable to water vapour. - Applicable on horizontal and vertical surfaces. - Transitable with use of reinforcing mesh between layers. - Easy to apply. - High performance 1.5 to 3.0 Kg/m2.
- Up to 1,396Nm of torque for high-performance screwdriving; - Up to 1,898Nm of torque effort to ensure the elimination of tight screws; - 4-mode selection control for better control over fastening applications, reducing the risk of damage to materials, accessories and components.
