SOMTA Drill DIN345 HSS MT5 Ø 68 mm
Ready to Ship
2056800
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 2056800 | |||||||||
SOMTA Drill DIN345 HSS MT5 Ø 68 mm |
|||||||||
|
Description |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
tungsten-carbide-burr-d-ball-kud
FRESA TUNGS. KUD 1614/6 Z1Ball-shaped burr according to DIN 8032 with cut conforming to DIN 8033.
fasteners-and-fixings
CHEMITOOL FASTENERS Slotted Raised Countersunk Head Screw DIN 964 M6X25 4.8...- Raised Countersunk Head Screw PHILLIPS Passivated Stainless Steel;
- DIN 964;
- Material: 4.8;
- Finishing: Passivated Stainless Steel.
- DIN 964;
- Material: 4.8;
- Finishing: Passivated Stainless Steel.
home
BRALO Aluminium/Stainless Steel A2 3,2X6,5MM Sealed Rivet- The joints are completely sealed to fluids, avoiding leakage of liquids or vapours due to the locking of the mandrel head inside the rivet body.
vapours, thanks to the locking of the head of the mandrel inside the rivet body.
vapours, thanks to the locking of the head of the mandrel inside the rivet body.
home
DASSY Lucca High Visibility Work Shorts n.º 52 +/- 290 g/m² Fluo Orange/Navy'- High visibility work shorts
- These short work trousers Lucca offer a high visibility safety class 1, practical pockets and ultra-durable nylon Cordura® reinforcements.
- PESCO 74 - HIVIS FABRIC, +/- 290g/m²
- These short work trousers Lucca offer a high visibility safety class 1, practical pockets and ultra-durable nylon Cordura® reinforcements.
- PESCO 74 - HIVIS FABRIC, +/- 290g/m²
fasteners-and-fixings
CHEMITOOL FASTENERS Slotted Countersunk Head Wood Screw DIN 97 5/8X5 Brass- Slotted Countersunk Head Wood Screw Brass;
- DIN 97;
- Finishing: Brass.
- DIN 97;
- Finishing: Brass.
home
LUZ DE TRABALHO USB-C- Workplace resistant: Durable housing and IP54 rating for protection against dust and water;
- Powerful LEDs: Up to 1000 lumens of brightness in high mode;
- Belt clip: convenient portability;
- Fast charging: Charge the entire battery in just 75 minutes with cable (included) and 5VDC 3A power supply/pole (not included);
- Hook: Hang from hoses, pipes, tubes or cables for hands-free operation;
- Magnetic: Strong magnet on the back for mounting light on metal surfaces in the workplace.
- Powerful LEDs: Up to 1000 lumens of brightness in high mode;
- Belt clip: convenient portability;
- Fast charging: Charge the entire battery in just 75 minutes with cable (included) and 5VDC 3A power supply/pole (not included);
- Hook: Hang from hoses, pipes, tubes or cables for hands-free operation;
- Magnetic: Strong magnet on the back for mounting light on metal surfaces in the workplace.
lamela-de-perno-para-inox
BELFLEX Shaft-Mounted Flap Wheels A-40 40 x 15 x 6 mm- Suitable for fine grinding and polishing in steel surfaces and edges, steel and stainless plates.
disco-fibra-para-metal-menor-aquecimento
PFERD Fibre Discs Fibre Discs FS Ceramic Oxide Grain CO G80- For aggressive grinding with a very high stock removal rate and very long tool life.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- The ceramic oxide grain is specifically designed for work on hard materials and layers.
- Abrasive: Ceramic oxide grain CO.
- Recommendations for use: Use powerful angle grinders.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- The ceramic oxide grain is specifically designed for work on hard materials and layers.
- Abrasive: Ceramic oxide grain CO.
- Recommendations for use: Use powerful angle grinders.
disco-de-lamelas-dobradas-para-inox
CHEMITOOL CUTTING Ø125x22mm Z60 Conical Zirconia Alumina Z Flap Disc- Fast cooling;
- 2 hours polish;
- Aggressive thinning;
- Little vibration;
- Thinning resistance, down to the last grain;
- Great stability and job safety;
- Long tool life;
- Suitable for: Steel and Stainless Steel (INOX);
- Abrasive: Zirconia Alumina and Aluminium Oxide;
- Suitable Machines: Straight and Angular Grinders.
- 2 hours polish;
- Aggressive thinning;
- Little vibration;
- Thinning resistance, down to the last grain;
- Great stability and job safety;
- Long tool life;
- Suitable for: Steel and Stainless Steel (INOX);
- Abrasive: Zirconia Alumina and Aluminium Oxide;
- Suitable Machines: Straight and Angular Grinders.
fita-de-serra-para-metal
CHEMITOOL CUTTING Band Saw Blade POWER M42C 2700x27x0,9mm Z8/12N- 8% Co teeth (M42);
- High cutting performance;
- Width from 0,6 to 80mm;
- Thickness from 0,6 to 1,6mm;
- Uniform welding;
- Resistance to breakage;
- Long tool life.
- High cutting performance;
- Width from 0,6 to 80mm;
- Thickness from 0,6 to 1,6mm;
- Uniform welding;
- Resistance to breakage;
- Long tool life.