SOMTA 15˚ Spiral Machine Tap ISO529 M11
Available
5091100
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 5091100 | |||||||||
SOMTA 15˚ Spiral Machine Tap ISO529 M11 |
|||||||||
|
Description |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
home
KING TONY PH2 PHILLIPS® Power Bit 50mm- Power driving 1/4 PHILLIPS® head;
- Short neck (9.5 mm) type;
- DIN ISO 2351-2;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
- Short neck (9.5 mm) type;
- DIN ISO 2351-2;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Type N, HSS-G Flat (Ø 6,80mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
home
LIV Oil HL-ISO38 Fluidraliv 45L- Hydraulic oils of improved quality with special additives that make them resistant to corrosion, ageing, etc.
home
KING TONY H8 50mm Power Bit Hexagon Head- Power driving 1/4 hexagonal head;
- DIN ISO 2351-3;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
- DIN ISO 2351-3;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
home
KING TONY 12 (un.) Open End Wrench Set 1112SR-Fixed spanner set.
-Made from chrome vanadium steel, chrome-plated finish and polished edges.
-Made from chrome vanadium steel, chrome-plated finish and polished edges.
ponta-de-aparafusar-philips
KING TONY 1/4' PH2 PHILLIPS® Bit- Silicon chrome vanadium alloy steel (S2)
- Anti-rust oiled, sand-blasted
- Total length : 25 mm;
- DIN ISO 2351-2.
- Anti-rust oiled, sand-blasted
- Total length : 25 mm;
- DIN ISO 2351-2.
home
STARRETT Magnetic Base with Flex-O-Post Rod- Flex-O-Post.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
din-94-chaveta-1-2-cana
CHEMITOOL FASTENERS Split Spin ½ DIN 94 5x36 White Zinc plated- Split Pin ½ White Zinc plated;
- DIN 94;
- Material: Spring steel;
- Finishing: White Zinc plated.
- DIN 94;
- Material: Spring steel;
- Finishing: White Zinc plated.
escovas-de-carvao
ESCOVA
home
CHEMITOOL BY PAYPER Sweat Orlando 280 g Light Grey XL- Long sleeves.
- Round neck.
- Reinforced seams.
- Round neck.
- Reinforced seams.
