SOMTA Drill DIN338 HSS Ø 11,75 mm
Available
1011175
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 1011175 | |||||||||
SOMTA Drill DIN338 HSS Ø 11,75 mm |
|||||||||
|
Description |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
rolling-bearings
ROLAMENTO - 51109
parafuso-pladur-cabeca-embeber
CHEMITOOL FASTENERS Self-Drilling Drywall Screw PHILLIPS for Plasterboard...-Material: Steel.
-Housing: Philips.
-Head shape: Countersunk head.
-Thread: Normal pitch
-Finish: Phosphated.
-Housing: Philips.
-Head shape: Countersunk head.
-Thread: Normal pitch
-Finish: Phosphated.
sds-plus-hammer-drill-3-cutters
DeWalt SDS Plus Extreme Bit 2 Cuts 18x250mm- The Innovative EXTREME 2® SDS-Plus drill bit is amongst the best in terms of its speed, life and endurance.
- Superior carbide grade for long life and greater durability.
- Optimised flute design allows efficient debris removal.
- Superior carbide grade for long life and greater durability.
- Optimised flute design allows efficient debris removal.
twist-drill-din-340-n-hss-g
RUKO Spiral Bits DIN 345 - Cone Morse Nº2 HSSE-Co5 (Ø20,00mm)- Main use Steel (N / mm ²) <900 and steel (N / mm ²) <1100
- Secondary use Stainless steel, aluminum, brass, bronze, plastics and cast iron
- Secondary use Stainless steel, aluminum, brass, bronze, plastics and cast iron
home
CHEMITOOL BY PAYPER Sweat New Orleans 260gr Marine Blue L- Long sleeves.
- Round neck.
- Reinforced seams.
- Round neck.
- Reinforced seams.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M6X20 8.8 without...- Hexagon Head Bolt Screw Full Thread Plain;
- DIN 933;
- Material: 8.8;
- Finishing: Plain.
- DIN 933;
- Material: 8.8;
- Finishing: Plain.
ponta-de-feltro-forma-cilindrica-zya
MO FELTRO FK ZYA 2025/6 ST-BOThe cylindrical shape ZYA is mainly used peripherally;
-The variant with end hole (ST-BO) is particularly suitable for face-down use;
-Felt points with metal inserts (MS) are used for increased stock removal when pre-polishing with diamond polishing pastes.
-The variant with end hole (ST-BO) is particularly suitable for face-down use;
-Felt points with metal inserts (MS) are used for increased stock removal when pre-polishing with diamond polishing pastes.
jigsaws
AEG ST800XE Jigsaw-Powerful 705-watt motor.
-Patented FIXTEC system for changing saw blades in seconds.
-4 -stage pendulum adjustment.
-Variable speed electronics for control.
-Slim, ergonomic design with integrated soft grip handle.
-Patented FIXTEC system for changing saw blades in seconds.
-4 -stage pendulum adjustment.
-Variable speed electronics for control.
-Slim, ergonomic design with integrated soft grip handle.
home
DeWalt Mesh Sanding Discs 150mm G80- Mesh sanding sheets last at least four times longer than traditional DeWalt sandpaper sheets.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
fasteners-and-fixings
CHEMITOOL FASTENERS Hexagonal Screw BSW 1/2X4.1/2 ANSI B1821
home
BETA 1257LP Micro-Screwdrivers 0,4x2mm for Slotted Head Screws-Micro-slotted keys for slotted-head screws.
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 3,10mm)- Main application Steel (N / mm²) <900 and cast iron
- Secondary application Brass and bronze
- Secondary application Brass and bronze