Datasheet \ Reference 7211300 | |||||||||
SOMTA Taper Reamer DIN311 HSS 13 mm |
|||||||||
Description |
|||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
16 other products in the same category:
home
INDASA P120 230x280 Rhynalox White Line Sheet- High initial cutting capacity.
- Fast material removal.
- Fast material removal.
home
ANi Male Threaded Connector With Spring 61/MG 3/8M ø 5 x 8 mm- Cylindrical male thread ISO 228 (BSPP);
- MG = Swivelling.
- MG = Swivelling.
home
KING TONY 3/4' 6 Points Metric Thin Wall Long Impact Socket 29mm- 6 points metric thin wall long impact socket;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
home
GTV Drawer Axis Pro Soft-Close 107x300 AnthraciteSLIM drawer with interior height of 86mm, with load capacity
of up to 40 kg and soft-close undermount slide.
Product Benefits
- Full extraction concealed slide with soft-close
- Tool-free assembly and disassembly
- Silent and synchronised operation
- Length: 300 mm;
- Adjustment up to 2mm;
- Tested and certified for up to 60,000 cycles of use.
of up to 40 kg and soft-close undermount slide.
Product Benefits
- Full extraction concealed slide with soft-close
- Tool-free assembly and disassembly
- Silent and synchronised operation
- Length: 300 mm;
- Adjustment up to 2mm;
- Tested and certified for up to 60,000 cycles of use.
home
MILWAUKEE Metal Drill Bits HSS Rollforged - DIN 338 with Reduced Shank 18.5 x...- Genuine MILWAUKEE accessories;
- High speed steel rollforged metal drill bits produced according to DIN 338;
- Oxide coating enables quick swarf removal;
- Normal point shaped cutting tip with 118° angle;
- Type N flute normal angle;
- Suitable for drilling in steel, cast iron, alloyed and non-alloyed material up to 800 N/mm².
- High speed steel rollforged metal drill bits produced according to DIN 338;
- Oxide coating enables quick swarf removal;
- Normal point shaped cutting tip with 118° angle;
- Type N flute normal angle;
- Suitable for drilling in steel, cast iron, alloyed and non-alloyed material up to 800 N/mm².
home
KING TONY 1/2” DR. Impact Bit Socket H7- Material: Chrome molybdenum alloy steel;
- Finishing: Phosphate sunk.
- Finishing: Phosphate sunk.
home
KING TONY Ø4 Sheathed Pin Punch-This product is made of high quality materials to serve you for years to come.
home
KING TONY T15 Power Bit TORX® Head 150mm- Power driving 1/4 for TORX® head screw;
- DIN ISO 2351-3;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
- DIN ISO 2351-3;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
home
ANi Sleeve For Rubber Hose Connectors 10/M 1/4 F ø 13 mm- Cylindrical female thread- ISO 228 (BSPP);
- Nickel-plated brass (UNI EN 12164 CW 614N).
- Nickel-plated brass (UNI EN 12164 CW 614N).