RIDGID Handheld Wet Drilling with Crown Segment Diamond Bits 14 mm

- 6-Point Bit;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, sand-blasted.

-Torque tolerance +/-3% (CW).

- Genuine MILWAUKEE accessories;
- Polish up of weatherbeaten lacquer, lacquer re-conditioning.

Water-cooled TIG torch.
- Water-cooled;
- Up to 320 A;
- Assorted operating variants;
- Ergonomic handle recess, size 1;
- Ball joint;
- Leather hose package;
- Long duty cycle.

- Impact hex bit & bit holder - hexagon head;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.

For aggressive grinding with the highest stock removal rates on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL

- Bubbles for leveling at different angles 180°, 90°, 45°;
- Bubbles ø 12mm for better visibility and ease of reading;
- Accuracy of the work planes 2mm/m on both sides;
- Rubber end to protect the spirit level in case of falls or bumps;
- Upper window to read the bubble also from above;
- Extra large plastic bubble compartments to ensure protection in case of bumps and falls;
- Continuous marking;
- Hole for hanging the spirit level;
- Yellow powder coating for better protection of the spirit level surface;
- V-groove base for use on pipes.

1/2 Inside Square-drive, ISO 1711-2, for power drivers, extra deep, Chrome Alloy Steel, gunmetal finish.

- Low density sponge, applied between support and disc.
- Fully compatible with Rhynogrip abrasive systems.