RIDGID Handheld Wet Drilling with Crown Segment Diamond Bits 72 mm
Available
RID52096
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference RID52096 | |||||||||
RIDGID Handheld Wet Drilling with Crown Segment Diamond Bits 72 mm |
|||||||||
|
Description |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
home
FITA MÉTRICA 5M/19MM ABS- Ergonomically designed exterior made of ABS material;
- Tape with matte, anti-reflective nylon coating;
- Very hard tape;
- Very strong hook at the top -2 rivets with stainless steel reinforcement plate every 2 and 3 m -3 rivets with stainless steel reinforcement plate every 5 and 8 m;
- Double-sided printed tape, to be used as a ruler.
- Tape with matte, anti-reflective nylon coating;
- Very hard tape;
- Very strong hook at the top -2 rivets with stainless steel reinforcement plate every 2 and 3 m -3 rivets with stainless steel reinforcement plate every 5 and 8 m;
- Double-sided printed tape, to be used as a ruler.
aparador-de-relva-sem-cabo
APARADOR RELVA 12V 30C-This high performance cordless trimmer, with its nylon cutting line, is very safe to use. -It has a safety brake that stops the line turning in less than three seconds. -The safety switch means it cannot be started accidentally because two triggers must be pressed before the trimmer can be started.
din-975-varao-roscado-1m
CHEMITOOL FASTENERS Threaded Rod - 1m DIN 975 M48 8.8 White Zinc plated- Threaded Rod - 1m White Zinc plated;
- DIN 975;
- Material: 8.8;
- Finishing: White Zinc plated.
- DIN 975;
- Material: 8.8;
- Finishing: White Zinc plated.
cutting-tools
LIMA 3510 350 MM H1
parafusos-rosca-para-chapa
CHEMITOOL FASTENERS Tapping Screw Pan Head Cross Recessed PHILLIPS DIN 7981C...- Tapping Screw Pan Head Cross Recessed Phillips Passivated Stainless Steel;
- DIN 7981C;
- Material: A2;
- Finishing: Stainless steel.
- DIN 7981C;
- Material: A2;
- Finishing: Stainless steel.
hand-tap-m-din-352-hss
TERRAX by RUKO Hand Taps M5 DIN 352 HSS- Taper tap: 5 - 6 thread chamfer.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
home
PFERD Combiclick Fibre Discs Ceramic Oxide Grain CO G50 125 mm- For aggressive grinding with a very high stock removal rate and very long tool life.
- The ceramic oxide grain is specifically designed for work on hard materials and layers.
- Abrasive: Ceramic oxide grain CO.
- Recommendations for use: Use powerful angle grinders.
- The ceramic oxide grain is specifically designed for work on hard materials and layers.
- Abrasive: Ceramic oxide grain CO.
- Recommendations for use: Use powerful angle grinders.
home
CHEMITOOL BY PAYPER SAFE HI-VI AV Jacket Bicolour Yellow Fluo Blue Navy L- Multi-station.
- High visibility.
- Reflective tapes.
- Belted cut.
- High visibility.
- Reflective tapes.
- Belted cut.
carbide-cutting-straight-shank-drill
CHEMITOOL CUTTING Ø20X400MM C2 POWER Masonry Drill- Optimum quality/value ratio;
- Tungsten carbide head;
- 2 cutters;
- Excellent drilling performance;
- Available from diameter 3,0 to 20m;
- Long tool life;
- Head: Tungsten carbide;
- Suitable for: Concrete, brick, wood, aluminum, and natural stone;
- Compatible machine: Portable percussion drill machine.
- Tungsten carbide head;
- 2 cutters;
- Excellent drilling performance;
- Available from diameter 3,0 to 20m;
- Long tool life;
- Head: Tungsten carbide;
- Suitable for: Concrete, brick, wood, aluminum, and natural stone;
- Compatible machine: Portable percussion drill machine.