Spray body protection for Turbokiller
Available
KR41528
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference KR41528 | |||||
Spray body protection for Turbokiller |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
din-7505b-parafuso-cabeca-queijo
CHEMITOOL FASTENERS Chipboard Screw Pan Head POZIDRIV DIN 7505B 6X60 White...
chaves-tubulares-e-de-cachimbo
KING TONY 12x6 Point Metric Angled Socket Wrench 1080 8mm- Characteristics:
- Angle and through-hole design;
- High quality steel, chrome plated;
- Deep recess at one side and open end socket at the other, easily fit over protruding studs;
- ISO 2236.
- Angle and through-hole design;
- High quality steel, chrome plated;
- Deep recess at one side and open end socket at the other, easily fit over protruding studs;
- ISO 2236.
lamela-de-nucleo-para-metal
CHEMITOOL CUTTING Ø165x25,4/30mm A120 Aluminium Oxide A Flap Wheel- Flexibility;
- Excellent adaptation to the workpiece edges;
- Highly resistant;
- Long tool life;
- Abrasive: Aluminium Oxide A;
- Suitable for: Steel, Cast Steel, Cast Iron;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders and Bench Grinders.
- Excellent adaptation to the workpiece edges;
- Highly resistant;
- Long tool life;
- Abrasive: Aluminium Oxide A;
- Suitable for: Steel, Cast Steel, Cast Iron;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders and Bench Grinders.
aspirador-cht10070211240wd0
CHEMITOOL Dust Removal Switch
din-94-chaveta-1-2-cana
CHEMITOOL FASTENERS Split Spin ½ DIN 94 1x16 White Zinc plated- Split Pin ½ White Zinc plated;
- DIN 94;
- Material: Spring steel;
- Finishing: White Zinc plated.
- DIN 94;
- Material: Spring steel;
- Finishing: White Zinc plated.
oil-free-direct-driven-air-compressors
ROLAMENTO DA CAMBOTA AO CARTER
home
PFERD Combiclick Fibre Discs CC-FS Ceramic Oxide Grain CO-COOL G120 180 mm- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
sds-plus-hammer-drill-2-cutters
IRWIN Pack 5 Construction Bits SPEEDHAMMER PLUS IRWIN Ø5x110 mmSpeed. Set the pace with Speedhammer ™ Plus. With 28% greater flute capacity, the innovative design goes direct and direct. It removes dust and debris very quickly. E is particularly effective on uncured concrete due to unobstructed performance
sds-max-concrete-hammer-drill-4-cutters
CHEMITOOL CUTTING Ø30,0X370MM SDS-MAX Hammer Drill Bit - CX4 Performance- Optimum quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 12,0 to 52mm diameter;
- Long tool life;
- Head: 4 cutters tungsten carbide;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Heavy electro-pneumatic hammer.
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 12,0 to 52mm diameter;
- Long tool life;
- Head: 4 cutters tungsten carbide;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Heavy electro-pneumatic hammer.
home
KING TONY TORX® Bit 5/16' T55 36mm- TORX® Bit;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, sand-blasted.
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, sand-blasted.
home
KING TONY 1/2” DR. Standard Socket Shelf Set 172 Pieces- Content: 6PT: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26. 27, 28, 29, 30, 32.
countersinker-din-335-c-90-hss
CHEMITOOL CUTTING 90º Countersinker Din335C HSS M2 Ø23,0MM- Excellent quality/value ratio.
- Fully ground in M35 High Speed Steel.
- TiAlN Coating.
- 3 cutting edges.
- Excellent chamfering ability.
- Breakage resistance.
- Long tool life.
- Fully ground in M35 High Speed Steel.
- TiAlN Coating.
- 3 cutting edges.
- Excellent chamfering ability.
- Breakage resistance.
- Long tool life.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M33X150 8.8...- Hexagon Head Bolt Partial Thread White Zinc plated;
- DIN 931;
- Material: 8.8;
- Finishing: White Zinc plated.
- DIN 931;
- Material: 8.8;
- Finishing: White Zinc plated.