Sleeve for heating chamber
Available
KR44081
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference KR44081 | |||||
Sleeve for heating chamber |
|||||
 |
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
home
BRALO Standard Grooved Head Rivet Steel/Steel 4,8x8mm- To improve the weather resistance of all parts, various protective coatings or surface treatments are used, all free of hexavalent chromium.
home
KING TONY T20 Power Bit TORX® Head 150mm- Power driving 1/4 for TORX® head screw;
- DIN ISO 2351-3;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
- DIN ISO 2351-3;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, phosphate sunk;
- Magnetic.
home
BRALO Standard Large Head Rivet Steel/Steel 4.8x30mm- To improve the weather resistance of all parts, various protective coatings or surface treatments are used, all free of hexavalent chromium.
home
DASSY Felix Sweatshirt S +/- 290 g/m² Navy'- Not your average sweater, but a robust work sweatshirt thanks to the reinforced seams at neck, shoulders and sleeves. Open the short zip to easily put it on or take it off and close the zip to regulate the temperature. The neutral design and wear-resistant fabric make the DASSY® Felix your perfect partner for personalisation with embroidery or printing.
- COPES 80, +/- 290 G/M²
- COPES 80, +/- 290 G/M²
twist-drill-din-338-n-hss-g
RUKO Twist Drill 10,25mm DIN 338 type N, HSS RolledHigh-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity.
Thanks to the split point, this drill has good centring properties and requires little pressure.
Thanks to the split point, this drill has good centring properties and requires little pressure.
home
PFERD Polifan Flap Discs Universal Line A PSF Steelox Flat Type PFF 115 A 80...- POLIFAN flap disc with high stock removal rate and long tool life.
- Materials that can be worked: steel, stainless steel (INOX).
- Applications: surface grinding, weld dressing.
- Abrasive: Aluminium oxide A.
- Materials that can be worked: steel, stainless steel (INOX).
- Applications: surface grinding, weld dressing.
- Abrasive: Aluminium oxide A.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M12X25 8.8 White...- Hexagon Head Bolt Screw Full Thread White Zinc plated;
- DIN 933;
- Material: 8.8;
- Finishing: White Zinc plated.
- DIN 933;
- Material: 8.8;
- Finishing: White Zinc plated.
hand-tap-mf-din-2181-hss
RUKO Hand Tap MF DIN 2181 HSS, Rectified (Ø 25,00 mm)
armacao-de-serrote-para-madeira
IRWIN Jack® Bowsaw Dry Wood XPERT 610 mm- Triple-ground teeth;
- 1mm rigid blade;
- Deep gullets;
- Fine nose teeth;
- Soft-grip handle with finger guide;
- Hard point teeth;
- High quality C75 steel blade;
- Water based lacquer.
- 1mm rigid blade;
- Deep gullets;
- Fine nose teeth;
- Soft-grip handle with finger guide;
- Hard point teeth;
- High quality C75 steel blade;
- Water based lacquer.
safety
DUNLOP Aquila Safety Boots nº46- Three-dimensional, tough and breathable, with anti-abrasion inserts.
- High-viscosity inserts.
- Non-slip tongue.
- Composite toecap.
- High-viscosity inserts.
- Non-slip tongue.
- Composite toecap.
din-84-parafuso-cabeca-cilindrica-fn
CHEMITOOL FASTENERS Slotted Cheese Head Screw DIN 84 M3X6 A2 Passivated...- Slotted cheese head screw passivated stainless steel;
- Material: stainless steel;
- DIN 84.
- Material: stainless steel;
- DIN 84.