Fuel filter
Ready to Ship
KR44083
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference KR44083 | |||||
Fuel filter |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
din-916-perno-sextavado-interior-concavo
CHEMITOOL FASTENERS Hexagon Set Screw Cup Point DIN 916 M12X30 45H Plain- Hexagon Set Screw Cup Point Plain;
- DIN 916 / ISO 4029;
- Material: 45H;
- Acabamento: Plain.
- DIN 916 / ISO 4029;
- Material: 45H;
- Acabamento: Plain.
countersinker-din-335-c-90-hss
Taper And Deburring Countersinks DIN 335 Type C 90º HSS (Ø5,8mm) RUKO
din-125a-anilha-de-chapa-plana
CHEMITOOL FASTENERS Flat Washer DIN 125A M30 140HV White Zinc plated- Flat Washer White Zinc plated;
- DIN 125A;
- Material: 140HV;
- Finishing: White Zinc plated.
- DIN 125A;
- Material: 140HV;
- Finishing: White Zinc plated.
home
STAHLWILLE Spark Plug Socket nº 4660 16 mmExtra deep, with magnet, outside hexagon 19 mm, HPQ high performance steel, chrome plated.
aspirador-cinzas-cht10070111420d0
CHEMITOOL Metallic Hoserolling-bearings
ROLAMENTO - 1313 K
home
PFERD Shank Mounted End Brushes, Crimped - Steel Wire (ST) Combitwist Type...- Suitable for light brushing such as deburring, cleaning and derusting.
home
CHEMITOOL CUTTING Band Saw Blade POWER M51C 3035x27x0,9mm Z4/6- Teeth in 10% Co (M51);
- High cutting performance;
- Width from 27mm;
- Thickness from 0,9mm;
- Uniform welding;
- Resistance to breakage;
- Long tool life.
- High cutting performance;
- Width from 27mm;
- Thickness from 0,9mm;
- Uniform welding;
- Resistance to breakage;
- Long tool life.
core-drill-hss-3-4-cbn-weldon
TERRAX by RUKO Core drills HSS with weldon shank (3/4'), cutting depth 30,0...- The 3-edged geometry with spiral grooves allows for extremely high stability of the Solid 3 drill bit and thus prevents the danger of edging due to excessive overloading or jamming of the chips.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.
home
PFERD Rubber Drum Holders Cylindrical GK 10040/8- These sandpaper holders have a smaller elasticity and are therefore more suitable for sanding corners and edges.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.
