Pressure spring K 1.8 x 9.1 x 18.5
Ready to Ship
KR15016
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference KR15016 | |||||
Pressure spring K 1.8 x 9.1 x 18.5 |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
din-7505a-parafuso-cabeca-embeber
CHEMITOOL FASTENERS Chipboard Screw Countersunk Head TORX Full Thread DIN...- Chipboard Screw Countersunk Head TORX Full Thread White Zinc plated;
- DIN 7505A;
- Material: C1022;
- Finishing: White Zinc plated.
- DIN 7505A;
- Material: C1022;
- Finishing: White Zinc plated.
din-7337a-rebite-cego-cabeca-boleada-lac
CHEMITOOL FASTENERS Lacquered Blind Rivet Dome Head DIN 7337A Ø4x6 Brown RAL...- Blind Head Rivet Brown;
- DIN 7337A;
- Material: aluminum/steel.
- DIN 7337A;
- Material: aluminum/steel.
case-sets
CHEMITOOL CUTTING Set of 170 DIN338 HSSE-G M35 (5% Cobalt) Ø1-10mm Spiral...- Set of 170 pieces;
- 5% Cobalt M35;
- Fully ground;
- Ambar finishing;
- Premium performance in stainless steel;
- Available from 1,0 to 13mm diameter;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Material: High Speed Steel with 5% Cobalt;
- Suitable for: Stainless steel, steel, aluminum, and non-ferrous metals;
- Compatible Machine: Handheld drill machine, bench drill machine.
- 5% Cobalt M35;
- Fully ground;
- Ambar finishing;
- Premium performance in stainless steel;
- Available from 1,0 to 13mm diameter;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Material: High Speed Steel with 5% Cobalt;
- Suitable for: Stainless steel, steel, aluminum, and non-ferrous metals;
- Compatible Machine: Handheld drill machine, bench drill machine.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M10X55 A2...- Hexagon Head Bolt Partial Thread Passivated Stainless Steel;
- DIN 931;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 931;
- Material: A2;
- Finishing: Passivated Stainless Steel.
parafusos-rosca-para-chapa
CHEMITOOL FASTENERS Tapping Screw Pan Head Cross Recessed PHILLIPS DIN 7981C...- Tapping Screw Pan Head Cross Recessed Phillips Passivated Stainless Steel;
- DIN 7981C;
- Material: A2;
- Finishing: Stainless steel.
- DIN 7981C;
- Material: A2;
- Finishing: Stainless steel.
nivel-de-bolha-anti-choque
STANLEY® Antichoc TMLH Level 2 Plates 40cm
staplers
FATMAX STANLEY 4-in-1 Multi-Stapler- The staple foot holds the staple at the correct angle to increase pressure on the tip;
- The easy-close staple requires minimal force to fire the staples;
- The belt hook allows for convenient storage during use;
- The raised palm keeps the hand in the correct position for better ergonomics and control;
- Indexed finger hook increases stability and control;
- Compatible with the stanley SWKBN, TRA200, TRA700 e CT100 staple series.
- The easy-close staple requires minimal force to fire the staples;
- The belt hook allows for convenient storage during use;
- The raised palm keeps the hand in the correct position for better ergonomics and control;
- Indexed finger hook increases stability and control;
- Compatible with the stanley SWKBN, TRA200, TRA700 e CT100 staple series.
rolling-bearings
ROLAMENTO - 303 (NU) ETNhome
MARTELO
tungsten-carbide-burr-e-tear-drop-tre
CHEMITOOL Tungsten cutter TRE 12X20-Ø6 C-3PADVANTAGES
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life.
The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy.
The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life.
The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy.
The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
home
BETA 412 Short Series HSS 8,25mm Cylindrical Drill Fully Ground-Short cylindrical drill, model 412, HSS, 8.25mm.
din-985-porca-sextavada-autoblocante
CHEMITOOL FASTENERS Prevailing Torque Nut with Plastic Insert DIN 985 M18 |8|...- Nylon Insert Lock Nut White Zinc plated;
- DIN 985;
- Material: |8|;
- Finishing: White Zinc plated.
- DIN 985;
- Material: |8|;
- Finishing: White Zinc plated.