Sealing plug R 3/8" male
Available
KR40018
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference KR40018 | |||||
Sealing plug R 3/8" male |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
bucha-metalica-junior
CHEMITOOL FASTENERS Drop-in Anchor with Internal Thread LV007 M16 White Zinc...-White Zinc-plated M16 Drop-In Steel Expansion Bushing.
home
PFERD Combidisc Non-Woven Discs Hard CDR G100 50 mm- Suitable for universal work on small and medium-sized metal surfaces, e.g. removing rough grinding traces, removing oxidation andlight deburring work.
- Achieve matt and satin-finished surfaces.
- Abrasive: Aluminium oxide A.
- Achieve matt and satin-finished surfaces.
- Abrasive: Aluminium oxide A.
twist-drill-din-340-n-hss-g
RUKO Spiral Bits DIN 345 - Cone Morse Nº4 HSS (Ø32,50mm)- Main application Steel (N / mm²) <900 and cast iron
- Secondary application Brass and bronze
- Secondary application Brass and bronze
maquina-soldar-mig-mag-compact
LORCH M242 MIG/MAG 230 + KITM242 MIG/MAG 230 + KIT
Durable, robust, and simply exceptional.
- Automatic setting control;
- Quality wire feeder;
- Robust case;
- Powerful cooling system;
- Double chain gas cylinder lock.
Control Concept Standard
-”3 steps to weld” operating concept;
- With automatic setting control;
- 2-cycle, 4-cycle and spot welding;
- 2-roll wire feeder;
- 12 voltage Levels.
KITSet includes: ML torch, 25 mm2 workpiece calender, pressure reducer with quantity and volume manometer, gas hose, K300 basket coil adapter, mains cable with plug.
Durable, robust, and simply exceptional.
- Automatic setting control;
- Quality wire feeder;
- Robust case;
- Powerful cooling system;
- Double chain gas cylinder lock.
Control Concept Standard
-”3 steps to weld” operating concept;
- With automatic setting control;
- 2-cycle, 4-cycle and spot welding;
- 2-roll wire feeder;
- 12 voltage Levels.
KITSet includes: ML torch, 25 mm2 workpiece calender, pressure reducer with quantity and volume manometer, gas hose, K300 basket coil adapter, mains cable with plug.
home
STARRETT Magnetic Base with Flex-O-Post Rod- Flex-O-Post.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
home
PFERD Polifan Flap Discs Performance Line A-COOL SG Inox + Alu Conical Type...- POLIFAN flap disc with particularly cool grinding on materials with poor thermal conduction such as stainless steel (INOX) and aluminium.
- Materials that can be worked: stainless steel (INOX), aluminium, other nonferrous metals.
- Applications: surface grinding, weld dressing, chamfering, deburring.
- Abrasive: Aluminium oxide A with active grinding, cooling coating (COOL).
- Materials that can be worked: stainless steel (INOX), aluminium, other nonferrous metals.
- Applications: surface grinding, weld dressing, chamfering, deburring.
- Abrasive: Aluminium oxide A with active grinding, cooling coating (COOL).
tungsten-carbide-burr-c-oval-wrc
FRESA TUNGSTENIO WRC 1225/6 Z3P SL150Cylindrical burr with radius end according to DIN 8032 with cut conforming to DIN 8033;
din-7991-parafuso-cabeca-de-embeber
CHEMITOOL FASTENERS Hexagon Socket Cap Screw Countersunk Head DIN 7991 M6X25...- Hexagon Socket Cap Screw Countersunk Head White Zinc plated;
- DIN 7991;
- Material: 10.9;
- Finishing: White Zinc plated.
- DIN 7991;
- Material: 10.9;
- Finishing: White Zinc plated.
sds-plus-hammer-drill-3-cutters
DeWalt SDS Plus Extreme Bit 2 Cuts 12x160mm- The Innovative EXTREME 2® SDS-Plus drill bit is amongst the best in terms of its speed, life and endurance.
- Superior carbide grade for long life and greater durability.
- Optimised flute design allows efficient debris removal.
- Superior carbide grade for long life and greater durability.
- Optimised flute design allows efficient debris removal.
home
DEWALT HAND TOOLS 225g Red Chalk Powder- Made for use with chalk line spools.
- Fade and water resistant design.
- Fade and water resistant design.