IRWIN SPEEDHAMMER POWER Construction Bit Ø18 mm/300 mm
Available
IW10507163
- Double carbide tip;
- Optimized tip design with double cutting edge;
- Geometry of the spiral maximized;
- Top-grade steel;
- Blue ring;
- Optimized slot design.
- Optimized tip design with double cutting edge;
- Geometry of the spiral maximized;
- Top-grade steel;
- Blue ring;
- Optimized slot design.
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference IW10507163 | |||||||||
IRWIN SPEEDHAMMER POWER Construction Bit Ø18 mm/300 mm |
|||||||||
|
Description- Double carbide tip; |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
home
BETA 96T Offset 7mm Hexagon Socket Wrench with Handle-Male hexagon socket wrenches with chrome-plated operating handles.
home
BRALO M5 Grooved Nut in Steel Fine Head Open Bottom- Bralo insert nuts provide a fast, reliable and simple fastening system with a great quality and resistance.
steel-safety-footwear
CHEMITOOL SAFETY Mugello S1P SRC HRO nº 48 Grey Safety Sneakers- Composite toe cap;
- Non-metallic anti-perforation insole;
- Hi-Poly Shock-absorbing and antibacterial insole;
- Anti-static sole with impact absorption on the heel;
- Oil and hydrocarbon resistant sole;
- Penetration resistant sole;
- HRO Sole – resistance of the outsole to hot contact 300ºC;
- Model available in 3 colors: red, blue and grey.
- Non-metallic anti-perforation insole;
- Hi-Poly Shock-absorbing and antibacterial insole;
- Anti-static sole with impact absorption on the heel;
- Oil and hydrocarbon resistant sole;
- Penetration resistant sole;
- HRO Sole – resistance of the outsole to hot contact 300ºC;
- Model available in 3 colors: red, blue and grey.
home
DASSY Miami Work Trousers n.º 56 +/- 245 g/m² Black'- Work trousers with knee pockets.
- These work trousers do not only have many practical pockets, they are also reinforced in strategic areas with the extremely resistant Cordura® fibre. What's more, the Cordura® knee pockets can be adjusted in height to ensure that your knee pads are in the best position to protect your knees. Do you prefer two-tone work trousers? The DASSY®Boston is just right for you!
- PESCO 61, +/- 245 G/M²
- These work trousers do not only have many practical pockets, they are also reinforced in strategic areas with the extremely resistant Cordura® fibre. What's more, the Cordura® knee pockets can be adjusted in height to ensure that your knee pads are in the best position to protect your knees. Do you prefer two-tone work trousers? The DASSY®Boston is just right for you!
- PESCO 61, +/- 245 G/M²
hand-tap-mf-din-2181-hss
RUKO Hand Tap MF DIN 2181 HSS, Rectified (Ø 5,50 mm)
twist-drill-din-338-n-hss-g
RUKO Espiral Bits DIN 1897 Tipo N, HSSE-Co5 - Short (Ø 4,20mm)- Main use Steel (N / mm ²) <900, Steel (N / mm ²) <1100 and stainless steel
- Secondary use Titanium aliedo
- Secondary use Titanium aliedo
home
STAHLWILLE Socket 3/8' nº 45 11 mmMetric sizes: DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3709, American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads), HPQ® high performance steel, chrome plated.
din-9021a-anilha-de-chapa-plana
CHEMITOOL FASTENERS Flat Washer DIN 9021A M5 140HV Plain-Wide Flat Plate washer DIN 9021 M5 4.8 without finishing.
din-94-chaveta-1-2-cana
CHEMITOOL FASTENERS Split Spin ½ DIN 94 2x20 White Zinc plated- Split Pin ½ White Zinc plated;
- DIN 94;
- Material: Spring steel;
- Finishing: White Zinc plated.
- DIN 94;
- Material: Spring steel;
- Finishing: White Zinc plated.
din-471-freio-de-seguranca-exterior
CHEMITOOL FASTENERS External Retaining Ring DIN 471 56mm 4.8 without Finishing-External Safety brake DIN 471 56mm 4.8 without finishing.