din-6798j-anilha-recartilha-interior
CHEMITOOL FASTENERS Serrated Lock Washer Internal Teeth DIN 6798J M22 A2...-Internal Circlip Ring DIN 6798J M22 A2 Passivated Stainless Steel.
BETA 419 Milled Body Stone Drills 10X160mm
Ready to Ship
BT004190050
-Beta 10X masonry tips with SDS Plus carbide shank milled body, size, 10x160mm.
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference BT004190050 | |||||||||
BETA 419 Milled Body Stone Drills 10X160mm |
|||||||||
|
Description-Beta 10X masonry tips with SDS Plus carbide shank milled body, size, 10x160mm. |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
home
PFERD Rubber Drum Holders Cylindrical GK 3825/6- These sandpaper holders have a smaller elasticity and are therefore more suitable for sanding corners and edges.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.
abracadeiras-de-serrilha
CHEMITOOL FASTENERS Nylon Cable Tie Green LV094 4,8X290mm- Round Pipe Clamp with Screw Green;
- LV094;
- Material: LV094;
- Finishing: Green.
- LV094;
- Material: LV094;
- Finishing: Green.
home
KING TONY 20MM Spark Plug Socket Wrench-Hose for threaded rod.
-Automatic rod lock.
-Does not damage the nets.
-Polished chrome finish.
-Automatic rod lock.
-Does not damage the nets.
-Polished chrome finish.
home
LENOX Standard Bi-Metal Reciprocating Saw Blades B618R 152X19X0,9mm 18TPI -...- T2™ Technology Tooth design delivers up to 2x the life versus previous model.
home
THIRARD 5mm-50CM PVC Coated Steel Cable- Steel cable, diameter 5 mm, length 0.50 m, PVC sheath.
macho-individual-n3-din-352-final
MACHO INDIVIDUAL M10X1,50 REF:3
home
STARRETT Magnetic Base with Flex-O-Post Rod- Flex-O-Post.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
