BETA 451 Fully Ground 36mm HSS Cranial Cutter
Ready to Ship
BT004510036
-HSS steel fully ground cutter.
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference BT004510036 | |||||||||
BETA 451 Fully Ground 36mm HSS Cranial Cutter |
|||||||||
|
Description-HSS steel fully ground cutter. |
||||||||
PRODUCTS DATA
|
|||||||||
16 other products in the same category:
sds-plus-hammer-drill-3-cutters
DeWalt SDS Plus Extreme Bit 2 Cuts 6x460mm- The Innovative EXTREME 2® SDS-Plus drill bit is amongst the best in terms of its speed, life and endurance.
- Superior carbide grade for long life and greater durability.
- Optimised flute design allows efficient debris removal.
- Superior carbide grade for long life and greater durability.
- Optimised flute design allows efficient debris removal.
din-912-parafuso-cabeca-cilindrica
CHEMITOOL FASTENERS Hexagon Cap Screw Cylindrical Head DIN 912 M8X12 8.8 Plain- Hexagon Cap Screw Cylindrical Plain;
- DIN 912;
- Material: 8.8;
- Finishing: Plain.
- DIN 912;
- Material: 8.8;
- Finishing: Plain.
rolling-bearings
ROLAMENTO - KIT 33/04
home
DASSY Avila Sleeveless Work Jacket S +/- 245 g/m² Navy'- This summer body warmer is practical, comfortable and functional thanks to its many pockets.
- PESCO 61, +/- 245 G/M²
- PESCO 61, +/- 245 G/M²
lima-triangular
PFERD Files Square DIN Series (with Handle) for Universal Use 250 mm- Triangular file, tapered and cut on three sides.
- Version with tang.
- Shape C according to DIN 7261.
- Suitable for filing angular profiles.
- Version with tang.
- Shape C according to DIN 7261.
- Suitable for filing angular profiles.
home
PFERD Polinox Hand Pads G80Exceptionally suitable for work on wear-resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M4X35 8.8 Plain- Hexagon Head Bolt Partial Thread Plain;
- DIN 931;
- Material: 8.8;
- Finishing: Plain.
- DIN 931;
- Material: 8.8;
- Finishing: Plain.
lamela-de-nucleo-para-metal
PFERD FR WS 12520 M14 A180 Flap Wheel- Optimal contour adaptation due to high flexibility;
- Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released;
- Front-side use very close to edges and at angles possible thanks to a special clamping system;
- Can be mounted directly onto the angle grinder without additional clamping devices.
- Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released;
- Front-side use very close to edges and at angles possible thanks to a special clamping system;
- Can be mounted directly onto the angle grinder without additional clamping devices.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagonal Screw UNF 3/4X6 ANSI B1821-Hexagonal UNF Screw 3/4X6 ANSI B1821.
chave-de-parafusos-fenda
STANLEY® FATMAX® Parallel Screwdriver 4x150mm STN1-65-093
din-571-parafuso-cabeca-sextavada
CHEMITOOL FASTENERS Hexagonal Head Choach Screw DIN 571 5X20 4.8 White Zinc...- Hexagonal Head Choach Screw White Zinc plated;
- DIN 571;
- Material: 4.8;
- Finishing: White Zinc plated.
- DIN 571;
- Material: 4.8;
- Finishing: White Zinc plated.