BETA 1501/3 Thin Leg Universal Puller
Available
BT015010103
-For the extraction of gears and parts housed in confined spaces.
-For internal and external use.
- The claws are equipped with 1501Z / S terminals
-For internal and external use.
- The claws are equipped with 1501Z / S terminals
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference BT015010103 | |||||||||
BETA 1501/3 Thin Leg Universal Puller |
|||||||||
|
Description-For the extraction of gears and parts housed in confined spaces. |
||||||||
PRODUCTS DATA
|
|||||||||
16 other products in the same category:
disco-fibra-para-inox-menor-aquecimento
PFERD Fibre Discs Fibre Discs FS Ceramic Oxide Grain CO-COOL G100 115 mm- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
home
CHEMITOOL BY PAYPER Men's Sweatshirt NOVA ORLEANS Grey Melange SCHEMITOOL BY PAYPER Men's Sweatshirt NOVA ORLEANS Grey Melange S
home
DeWALT Stone Set-Fixing kit for masonry, complete with 1 plug for fixing the drill stand to the wall, floor.
home
KRAFFT Dashboard Cleaning SpongeImpregnated sponge that leaves a clean, glossy and hydrophobic surface that makes future cleanings easier, regenerates damaged areas and does not harm plastic nor paint. Good for all kinds of plastic surfaces of the vehicle. Very useful to have always within reach, very easy to apply.
din-7983c-parafuso-cabeca-lentilha-ph
CHEMITOOL FASTENERS Tapping Screw Raised Countersunk Head Cross Recessed...- Cross Recessed Countersunk Head Tapping Screw Passivated Stainless Steel;
- DIN 7983C;
- Clase: A2;
- Material:Stainless Steel.
- DIN 7983C;
- Clase: A2;
- Material:Stainless Steel.
din-7505b-parafuso-cabeca-queijo
CHEMITOOL FASTENERS Chipboard Screw Pan Head POZIDRIV DIN 7505B 4x45 A2...
home
KING TONY 75mm 715mm Metric Combination Wrench-KING TONY® 12-point, 75 mm Jumbo Angle Head combination key.
din-934-porca-sextavada
CHEMITOOL FASTENERS Hexagonal Nut DIN 934 M22 |8| Plain- Hexagonal Nut Plain;
- DIN 934;
- Material: |8|;
- Finishing: Plain.
- DIN 934;
- Material: |8|;
- Finishing: Plain.
home
PFERD Combidisc Abrasive Discs Diamond CDR G126 25 mm- Exceptionally suitable for work on wear- resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
- Abrasive: Diamond.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
- Abrasive: Diamond.
home
DASSY Versailles Two-Tone Brace Overall n.º 46 +/- 245 g/m² Beige/Black'- Robust two-tone brace overall with practical pockets (including knee area) and ultra-resistant Cordura® nylon reinforcements.
- PESCO 61, +/- 245 G/M²
- PESCO 61, +/- 245 G/M²