INDASA P36 50mmx50m Rhynometal Roll
Available
IN020333
- High resistance support.
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference IN020333 | |||||||||
INDASA P36 50mmx50m Rhynometal Roll |
|||||||||
|
Description- High resistance support. |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
home
STAHLWILLE Socket 1/2' nº 50 22 mmmetric sizes: DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M, American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads), HPQ® high performance steel, chrome plated.
broca-retificada-36-hsse-co-5-ambar
RUKO Spiral Bits DIN 338 Type VA, HSSE-Co5 (Ø 6,75mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics
- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics
home
ANi Inflating Chuck 25/Wonder Ø 12 Ø 8 mm- Connector for rubber hose;
- Øval = valve size;
- F = Tailpiece size.
- Øval = valve size;
- F = Tailpiece size.
home
DeWALT Medium Size Rigid Box containing 21 SDS Plu Drills-DEWALT DT7937-QZ SDS PLUS 21-PIECE MASONRY DRILL AND SCREWDRIVER SET.
x-actos
STANLEY 9mm Slide Lock Snap-Off Knife- Multi-position slide lock: Quick blade depth adjustment.
- Slim ergonomic design: Greater comfort during cutting.
- Integrated blade snapper: Built into the handle for safe snapping of worn segments.
- Supplied with 9mm snap-off blade.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M36X150 10.9 Plain- Hexagon Head Bolt Partial Thread Plain;
- DIN 931;
- Material: 10.9;
- Finishing: Plain.
- DIN 931;
- Material: 10.9;
- Finishing: Plain.
din-471-freio-de-seguranca-exterior
CHEMITOOL FASTENERS External Retaining Ring DIN 471 12mm 4.8 without Finishing-External Safety brake DIN 471 12mm 4.8 without finishing.
home
DeWalt Mesh Sanding Discs 150mm G120- Mesh sanding sheets last at least four times longer than traditional DeWalt sandpaper sheets.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
lv-999-parafuso-aroscante-madeiras-duras
CHEMITOOL FASTENERS High Performance Chipboard Screw Countersunk Head LV999...-Helical tip from the end of the thread, allowing a better displacement in the wood during screwing and increasing the final adhesion.
-Threading thread 40º and optimized pitch for a smooth but fast penetration.
-25º tip, which allows easy centring and drilling even in harder woods.
-Threading thread 40º and optimized pitch for a smooth but fast penetration.
-25º tip, which allows easy centring and drilling even in harder woods.
home
KING TONY 8mm T-type 25° Universal Standard Socket Wrench-T-handle with 8mm King Tony cap.
-Handle width 200mm, total knob length 320mm.
-Handle width 200mm, total knob length 320mm.
home
Fatmax Hybrid Clamp 600mm STANLEY- Quick clamping - squeeze the trigger to quickly apply 136kg of initial clamping force to the workpiece;
- Strong clamping - clamp the workpiece with 374kg of clamping force by actuating the clamping screw;
- Screw with clamping hexagon - the clamping force can also be applied using a wrench on the screw;
- Built-in coupling - for extra length, connect 2 clamps together with the built-in coupling screws;
- Quick-change mechanism - for fast, tool-free conversion from clamp to spreader;
- Steel I-bar - prevents bending and flexing under pressure while increasing durability;
- V-shaped clamp bottoms - for effective clamping of irregularly shaped objects such as pipes.
- Strong clamping - clamp the workpiece with 374kg of clamping force by actuating the clamping screw;
- Screw with clamping hexagon - the clamping force can also be applied using a wrench on the screw;
- Built-in coupling - for extra length, connect 2 clamps together with the built-in coupling screws;
- Quick-change mechanism - for fast, tool-free conversion from clamp to spreader;
- Steel I-bar - prevents bending and flexing under pressure while increasing durability;
- V-shaped clamp bottoms - for effective clamping of irregularly shaped objects such as pipes.
fita-de-serra-para-metal
CHEMITOOL CUTTING Band Saw Blade POWER M42C 2845x27x0,9mm Z8/12N- 8% Co teeth (M42);
- High cutting performance;
- Width from 0,6 to 80mm;
- Thickness from 0,6 to 1,6mm;
- Uniform welding;
- Resistance to breakage;
- Long tool life.
- High cutting performance;
- Width from 0,6 to 80mm;
- Thickness from 0,6 to 1,6mm;
- Uniform welding;
- Resistance to breakage;
- Long tool life.