INDASA P120 Ø225 DC Line Red Rhynogrip Discs
Ready to Ship
IN552483
- High initial cutting capacity.
- Uniform finish.
- Uniform finish.
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference IN552483 | |||||||||
INDASA P120 Ø225 DC Line Red Rhynogrip Discs |
|||||||||
|
Description- High initial cutting capacity. |
||||||||
PRODUCTS DATA
|
|||||||||
16 other products in the same category:
tocha-mig-mag-refrigerada
TOCHA MIG/MAG LMS 320 ÁGUA / 4mt
tungsten-carbide-burr-a-cylinder-zya
PFERD Ø8x20mm ZYA High Performance Carbide MICRO Cylindrical Milling Cutter- High surface quality;
- Unlike with mounted grinding points, there is no change in geometry due to wear and tear;
- Use on almost all materials up to 68 HRC;
- The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
- Unlike with mounted grinding points, there is no change in geometry due to wear and tear;
- Use on almost all materials up to 68 HRC;
- The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
rolling-bearings
ROLAMENTO - 4308
bucha-metalica-ch-parafuso-sextavado
DeWALT FHS Sleeve Anchor Zinc Plated (12 x 65 mm) (25 PK)- Precision stamped tubular expansion sleeve locks firmly in the hole.
- Threaded tapered cone is drawn up into expansion sleeve upon tightening.
- Threaded tapered cone is drawn up into expansion sleeve upon tightening.
home
KING TONY Combination Tool Set for Tool Chest and Trolley 8 (un.) 9-90109MN-6-piece combination tool set for toolbox and trolley.
aparador-de-relva-com-cabo
25cm 350W Trimmer- Powerful 350W motor and 25cm cutting swath for efficient trimming of small gardens.
din-975-varao-roscado-1m
CHEMITOOL FASTENERS Threaded Rod - 1m DIN 975 M42 4.8 White Zinc plated- Threaded Rod - 1m White Zinc plated;
- DIN 975;
- Material: 4.8;
- Finishing: White Zinc plated.
- DIN 975;
- Material: 4.8;
- Finishing: White Zinc plated.
fasteners-and-fixings
CHEMITOOL FASTENERS Slotted Countersunk Head Screw DIN 963 5/32X2 BSW 4.8 Plain- Slotted Countersunk Head Screw Plain;
- DIN 963;
- Material: 4.8;
- Finishing: Plain.
- DIN 963;
- Material: 4.8;
- Finishing: Plain.
chave-de-caixa-curta-impacto-1-2
KING TONY 1/2” DR. Metric Deep Impact Socket Internal Hexagon 26mm- Material: Chrome molybdenum alloy steel;
- Finishing: Phosphate sunk.
- Finishing: Phosphate sunk.
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Type N, HSS-G Flat (Ø 7,90mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
chaves-de-abertura
IREGA ERGOTOP 6 Crescent wrench- Ergotop is the first adjustable wrench with an ergonomic replaceable handle.
home
CHEMITOOL BY PAYPER Red Padded Soft-Shell Jacket Creek M- Thermal insulation level 3;
- Certified to work in environments as low as -5°C;
- Waterproof;
- Windproof;
- Breathable;
- Stretch;
- Fleece lined collar;
- Multi-pockets;
- Reflective stripe on back and hood.
- Certified to work in environments as low as -5°C;
- Waterproof;
- Windproof;
- Breathable;
- Stretch;
- Fleece lined collar;
- Multi-pockets;
- Reflective stripe on back and hood.
home
DASSY Buffalo High Visibility Work Trousers n.º 62 +/- 290 g/m² Fluo Orange/Navy'- High visibility work trousers with knee pockets.
- Highly visible at work with these high vis work trousers with knee pockets. Count on a certified protection class 2 thanks to fluorescent main fabric and the reflective tape.
- PESCO 74 - HIVIS FABRIC, +/- 290 G/M²
- Highly visible at work with these high vis work trousers with knee pockets. Count on a certified protection class 2 thanks to fluorescent main fabric and the reflective tape.
- PESCO 74 - HIVIS FABRIC, +/- 290 G/M²