FACOM Mousse Tray for MODM.S1A
Ready to Ship
3148517922129
- Mousse Tray for MODM.S1A.
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 3148517922129 | |||||||
FACOM Mousse Tray for MODM.S1A |
|||||||
|
Description- Mousse Tray for MODM.S1A. |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
home
Dewalt POWER-TOOLS 3 Edge Drill Set 152mm- Three cutting edges allow for up to 6x faster cutting* combined with tri-flute design for optimum chip removal;
- Three cutting spurs for cleaner, faster holes and extended drilling life;
- Tri-flute tapered design for faster removal of wood chips and less binding.
- Three cutting spurs for cleaner, faster holes and extended drilling life;
- Tri-flute tapered design for faster removal of wood chips and less binding.
tesouras-de-poda
BLACK DECKER Hand Pruner with 18V 2Ah Lithium Battery- Up to 500 cuts per charge, using an 18V 2Ah battery;
- The cutting trigger can only be operated when the safety switch is pressed;
- Easy to use.
- The cutting trigger can only be operated when the safety switch is pressed;
- Easy to use.
twist-drill-din-338-n-hss-g
CHEMITOOL CUTTING 66X28MM Ø6 DIN1897 HSS-G Extra Short Spiral Fully Ground...- Excellent quality/value ratio;
- Fully ground;
- Extra short body;
- Available from 2,0 to 10mm diameter;
- Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
- Fully ground;
- Extra short body;
- Available from 2,0 to 10mm diameter;
- Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
home
KRAFFT 5l FH-EP 46 Hydraulic OilLubricant for hydraulic systems that work at high levels of pressure and which require excellent EP and wear-resistant characteristics.
lamela-de-perno-para-metal
CHEMITOOL CUTTING Ø50x20x6|6×30mm A120 Alu-Oxide Shaft Mounted Flap Wheel- Less vibration and noise;
- Flexibility;
- Excellent adaptation to contours;
- Finer finish;
- High material removal;
- Aggressive abrasive;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Aluminium Oxide A;
- Suitable for: Steel, Cast Steel, Cast Iron.
- Flexibility;
- Excellent adaptation to contours;
- Finer finish;
- High material removal;
- Aggressive abrasive;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Aluminium Oxide A;
- Suitable for: Steel, Cast Steel, Cast Iron.
home
BOSCH 112x450mm Diamond Wet Core Cutter for Concrete- Suitable for use with diamond bits designed for wet drilling
- The Diamond Wet Core Cutter for Concrete offers a long service life during wet drilling in concrete;
- The drill bit segments are laser-welded, which provides the desired strength and durability during drilling;
- The premium blend of diamonds and an optimized bond offer long-lasting use;
- In addition, the segments at the top of the core bit provide an easy start during drilling;
- This makes it possible to drill electrical installations, heating pipes, sanitary pipes, centering holes for anchors and so on;
- This wet drill bit is intended for concrete and reinforced concrete.
- The Diamond Wet Core Cutter for Concrete offers a long service life during wet drilling in concrete;
- The drill bit segments are laser-welded, which provides the desired strength and durability during drilling;
- The premium blend of diamonds and an optimized bond offer long-lasting use;
- In addition, the segments at the top of the core bit provide an easy start during drilling;
- This makes it possible to drill electrical installations, heating pipes, sanitary pipes, centering holes for anchors and so on;
- This wet drill bit is intended for concrete and reinforced concrete.
colete-alta-visibilidade
COLETE AV 65% POL 35% ALG
chaves-de-parafusos-fenda
KING TONY Slotted Precision Screwdriver 0.6x0.15mm- Slotted precision screwdriver with round shank;
- Metric size;
- Blade material - SNCM+V with black tip;
- PP Handle;
- Rotating tip;
- Polished chrome finish;
- DIN 5263.
- Metric size;
- Blade material - SNCM+V with black tip;
- PP Handle;
- Rotating tip;
- Polished chrome finish;
- DIN 5263.
twist-drill-din-338-n-hss-g
RUKO Twist Drill 12,8mm DIN 338 type N, HSS RolledHigh-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity.
Thanks to the split point, this drill has good centring properties and requires little pressure.
Thanks to the split point, this drill has good centring properties and requires little pressure.
ponta-de-feltro-forma-oval-wrc
MO FELTRO FK WRC 2025/6The cylindrical shape with radius end WRC is mainly used for work on small, concave contours