CHAVE FENDA PHILIPS 3-150 ADF
Ready to Ship
3148518696715
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 3148518696715 | |||||||
CHAVE FENDA PHILIPS 3-150 ADF |
|||||||
|
Description |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
home
DASSY Dakota Flame Retardant Brace Overall n.º 54 +/- 340 g/m² Grey'- Flame retardant brace overall with knee pockets
- The DASSY flame retardant workwear does not only have a flame retardant finish, but also meets all design requirements for this type of workwear. For instance, all pockets have flaps or are placed under a specific angle to prevent sparks from falling into the pockets. Moreover, all metal components (e.g. snap fastenings, zippers) are concealed, both on the outside and inside, to avoid heat transfer.
- CO 73, +/- 340 g/m²
- The DASSY flame retardant workwear does not only have a flame retardant finish, but also meets all design requirements for this type of workwear. For instance, all pockets have flaps or are placed under a specific angle to prevent sparks from falling into the pockets. Moreover, all metal components (e.g. snap fastenings, zippers) are concealed, both on the outside and inside, to avoid heat transfer.
- CO 73, +/- 340 g/m²
home
KING TONY Oil Filter Box Key Set-1/2 inch square drive.
-Supports up to 115.2 Nm (85 ft. lbs.).
-Suitable for 3/8 or 1/2 drive tools.
-Supports up to 115.2 Nm (85 ft. lbs.).
-Suitable for 3/8 or 1/2 drive tools.
rolling-bearings
ROLAMENTO - 688 ZZ (S)rolling-bearings
ROLAMENTO - 2210 (NU)
fasteners-and-fixings
CHEMITOOL FASTENERS Slotted Cheese Head Screw DIN 84 M5X25 4.8 Plain
home
KING TONY Nut Setter 10mm 100mm- Nut Setter, chrome vanadium alloy steel;
- Ideal for screwguns;
- Anti-rust oiled, sand-blasted;
- DIN 3126.
- Ideal for screwguns;
- Anti-rust oiled, sand-blasted;
- DIN 3126.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M8X18 8.8 without...- Hexagon Head Bolt Screw Full Thread Plain;
- DIN 933;
- Material: 8.8;
- Finishing: Plain.
- DIN 933;
- Material: 8.8;
- Finishing: Plain.
conjuntos-de-ferramenta-pneumatica
ECO+PLUS Kit Pneumatic Tools EP 52 PiecesIncludes:
- 1 Impact wrench 1/2”;
- 1 Collet 6 mm straight grinder;
- 1 Air blow gun;
- 1 Pressure meter;
- 1 Inflator adaptor;
- 1 Socket wrench adaptor;
- 1 Hex wrench;
- 1 Collet 3mm;
- 10 Sander nipples;
- 2 Spanners;
- 10 Grinding points;
- 2 Wrench;
- 4 Socket wrenches;
- 1 Adaptor;
- 4 Male nipple;
- 1 Mini oiler;
- 1 Teflon roll;
- 1 Needle nose;
- 1 Needle nose adaptor;
- 1 Female nose 1/4”;
- 1 Male nose 1/4;
- 1 Male nose 1/4”;
- 1 Rubber nose;
- 1 Safety nose;
- 1 Conical nose;
- 1 Case.
- 1 Impact wrench 1/2”;
- 1 Collet 6 mm straight grinder;
- 1 Air blow gun;
- 1 Pressure meter;
- 1 Inflator adaptor;
- 1 Socket wrench adaptor;
- 1 Hex wrench;
- 1 Collet 3mm;
- 10 Sander nipples;
- 2 Spanners;
- 10 Grinding points;
- 2 Wrench;
- 4 Socket wrenches;
- 1 Adaptor;
- 4 Male nipple;
- 1 Mini oiler;
- 1 Teflon roll;
- 1 Needle nose;
- 1 Needle nose adaptor;
- 1 Female nose 1/4”;
- 1 Male nose 1/4;
- 1 Male nose 1/4”;
- 1 Rubber nose;
- 1 Safety nose;
- 1 Conical nose;
- 1 Case.
tungsten-carbide-burr-g-tree-spg
CHEMITOOL CUTTING DIN8032 SPG 3x7/37-Ø3mm Cruzado C-3P Tungsten Carbide Burr- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life;
- Material: Tungsten;
- Suitable for: Steel, stainless steel, copper, bronze, cast iron, low alloy steel;
- Compatible machine: Electric or pneumatic straight grinder.
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life;
- Material: Tungsten;
- Suitable for: Steel, stainless steel, copper, bronze, cast iron, low alloy steel;
- Compatible machine: Electric or pneumatic straight grinder.
faca-standard-com-lamina-de-recolha
STANLEY® 99® E Knife with Retractable Blade STN1-10-099
cutting-tools
PFERD Abrasive Bands Aluminium Oxide A Cylindrical G150 19 x 25 mm- For universal applications from coarse to fine grinding.
- Abrasive: Aluminium oxide A.
- Abrasive: Aluminium oxide A.
lamela-de-perno-para-metais-duros
PFERD Mounted Flap Wheels Shank 6 x 40 mm Ceramic Oxide Grain CO-COOL G80 30...- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
