CHAVE MACHO ANGULAR 15MM
Available
3148511231517
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference 3148511231517 | |||||
CHAVE MACHO ANGULAR 15MM |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M27X60 10.9...- Hexagon Head Bolt Screw Full Thread Plain;
- DIN 933;
- Material: 10.9;
- Finishing: Plain.
- DIN 933;
- Material: 10.9;
- Finishing: Plain.
home
DeWalt Mesh Sanding Sheet 115 x 228mm G80- Mesh sanding sheets last at least four times longer than traditional DeWalt sandpaper sheets.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
home
STAHLWILLE 3/8' Bit Holder, Hexagon 1/4' nº 4421/4 inside hexagon, DIN 3126/ISO 1173 D 6.3. Internal hex drive with a collar-thrust spring. Bits are easy to insert, lock securelyin position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).
rolling-bearings
ROLAMENTO - 303 (N)
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M10X160 8.8 Plain- Hexagon Head Bolt Partial Thread Plain;
- DIN 931;
- Material: 8.8;
- Finishing: Plain.
- DIN 931;
- Material: 8.8;
- Finishing: Plain.
din-7973c-parafuso-cabeca-lentilha-fenda
CHEMITOOL Raised Countersunk Head Tapping Screw DIN 7973C 4,8x22 White Zinc...- Raised Countersunk Head Tapping Screw White Zinc Plated;
- DIN 7973C;
- Material: Steel.
- DIN 7973C;
- Material: Steel.
food-grade-aerosols
GRAND PRIX Grease SprayHigh performance lubricant PTFE foam;
-Good adhesion and ability to support heavy loads;
-Excellent resistance to water splashes;
-Prevents corrosion;
-Approved use in the Food Industry NSF-H1139849.
-Good adhesion and ability to support heavy loads;
-Excellent resistance to water splashes;
-Prevents corrosion;
-Approved use in the Food Industry NSF-H1139849.
home
ANi Male Threaded Elbow Fitting For Nylon Hoses 40/CM 1/4M ø 6 X 4 mm- Conical male thread ISO 7 (BSPT) - DIN 2999 - BS 21.
