DeWalt Mesh Sanding Discs 150mm G240
Ready to Ship
DTM3127
- Mesh sanding sheets last at least four times longer than traditional DeWalt sandpaper sheets.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference DTM3127 | |||||||||
DeWalt Mesh Sanding Discs 150mm G240 |
|||||||||
|
Description- Mesh sanding sheets last at least four times longer than traditional DeWalt sandpaper sheets. |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M24X40 A2...- Hexagon Head Bolt Screw Full Thread Passivated Stainless Steel;
- DIN 933;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 933;
- Material: A2;
- Finishing: Passivated Stainless Steel.
torno-de-bancada-tubos
RIDGID Angle Pipe Welding Vise 462
sds-max-concrete-hammer-drill-4-cutters
DEWALT POWER-TOOLS Hammer Drill Bit SDS-Max 18x340mmHigh Quality Bit long life hammerdrill features 2 cutter fully supported carbide head design for maximum performance, reduced vibration and improved hole quality.
home
DREMEL Spiral Cutting Bits- Spiral Cutting Bits;
- The tile cutting bit 562 cuts ceramic wall tile, cement board and plaster (Not for use on floor tile).
- The tile cutting bit 562 cuts ceramic wall tile, cement board and plaster (Not for use on floor tile).
cutting-tools
MO MONTADA SP1320 M6 ADW 80 M5V
sbd-spare-parts
CONCHA DE MEXILHAO
home
STAHLWILLE 3/4' IMPACT Socket Extra Deep 27 mm3/4 Inside Square-drive, ISO 1711-2, for power drivers, extra deep, Chrome Alloy Steel, gunmetal finish.
lamela-de-perno-para-metal
CHEMITOOL CUTTING Ø50x20x6|6×30mm A180 Alu-Oxide Shaft Mounted Flap Wheel- Less vibration and noise;
- Flexibility;
- Excellent adaptation to contours;
- Finer finish;
- High material removal;
- Aggressive abrasive;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Aluminium Oxide A;
- Suitable for: Steel, Cast Steel, Cast Iron.
- Flexibility;
- Excellent adaptation to contours;
- Finer finish;
- High material removal;
- Aggressive abrasive;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Aluminium Oxide A;
- Suitable for: Steel, Cast Steel, Cast Iron.
din-471-freio-de-seguranca-exterior
CHEMITOOL FASTENERS External Retaining Ring DIN 471 10mm 4.8 without Finishing
home
LENOX Standard Bi-Metal Reciprocating Saw Blades 418R 102X19X0,9mm 18TPI -...- T2™ Technology Tooth design delivers up to 2x the life versus previous model.
home
DASSY Lincoln Multinorm Work Trousers n.º 40 Minus +/- 290 g/m² Grey/Black'- Multinorm work trousers with knee pockets.
- Multinorm workwear offers versatile, multifunctional protection and meets the 5 most required standards for flame retardant protection, welding, antistatic properties, electric arc and chemicals. For instance, all clothing contains 1% Negastat® to avoid electrical static charge and all pockets have flaps or are placed under a specific angle to prevent sparks from falling into the pockets. Moreover, all metal components (e.g. snap fastenings, zippers) are concealed, both on the outside and inside, to avoid electrical or heat transfer.
- COPES 75, +/- 290 G/M²
- Multinorm workwear offers versatile, multifunctional protection and meets the 5 most required standards for flame retardant protection, welding, antistatic properties, electric arc and chemicals. For instance, all clothing contains 1% Negastat® to avoid electrical static charge and all pockets have flaps or are placed under a specific angle to prevent sparks from falling into the pockets. Moreover, all metal components (e.g. snap fastenings, zippers) are concealed, both on the outside and inside, to avoid electrical or heat transfer.
- COPES 75, +/- 290 G/M²
home
KING TONY T55 1/2' TORX® Internal Screw Bit Socket 80mm- DIN 3120;
- Socket made by chrome vanadium alloy steel;
- Bit made by silicon alloy steel (S2);
- Polished, chrome plated.
- Socket made by chrome vanadium alloy steel;
- Bit made by silicon alloy steel (S2);
- Polished, chrome plated.