E/22/2/P 3/8F FILTRO FRL
Available
AH117112
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference AH117112 | |||||||||
E/22/2/P 3/8F FILTRO FRL |
|||||||||
|
Description |
||||||||
PRODUCTS DATA
|
|||||||||
16 other products in the same category:
din-963-parafuso-cabeca-embeber-fn
CHEMITOOL FASTENERS Slotted Countersunk Head Screw DIN 963 M6X45 A2 white...- Slotted Countersunk Head Screw Passivated Stainless Steel;
- DIN 963;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 963;
- Material: A2;
- Finishing: Passivated Stainless Steel.
fita-de-serra-para-metal
CHEMITOOL CUTTING 2360mm Bandsaw Z6/10- 8% Co teeth (M42).
- High cutting performance.
- Available from 1310 to 6000mm diameter.
- Height from 13 to 34mm.
- Resistance to breakage.
- Long tool life.
- High cutting performance.
- Available from 1310 to 6000mm diameter.
- Height from 13 to 34mm.
- Resistance to breakage.
- Long tool life.
disco-de-lamelas-para-ligas-exoticas
CHEMITOOL CUTTING Ø180x22mm C60 Ceramic Oxide Crain Flap Disc- High performance;
- Aggressive thinning;
- Fast cooling;
- Stability during the polishing process;
- Little vibration;
- Multi-materials;
- Long tool life;
- Suitable for: Stainless Steel (INOX), Nickel-Based Alloys (e.g. Inconel and Hastelloy), Hard Aluminium Alloys;
- Abrasive: Ceramic Grain;
- Suitable Machines: Straight and Angular Grinders.
- Aggressive thinning;
- Fast cooling;
- Stability during the polishing process;
- Little vibration;
- Multi-materials;
- Long tool life;
- Suitable for: Stainless Steel (INOX), Nickel-Based Alloys (e.g. Inconel and Hastelloy), Hard Aluminium Alloys;
- Abrasive: Ceramic Grain;
- Suitable Machines: Straight and Angular Grinders.
sds-max-concrete-hammer-drill-4-cutters
CHEMITOOL CUTTING Ø40,0X920MM SDS-MAX Hammer Drill Bit - CX4 Performance- Optimum quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 12,0 to 52mm diameter;
- Long tool life;
- Head: 4 cutters tungsten carbide;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Heavy electro-pneumatic hammer.
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 12,0 to 52mm diameter;
- Long tool life;
- Head: 4 cutters tungsten carbide;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Heavy electro-pneumatic hammer.
sds-plus-hammer-drill-2-cutters
BROCA DE PERCUSSÃO SDS 5,0 X 160 MM
disco-de-lamelas-para-aluminio
Lam.X431 Stand.Metal: 115mm dir.Plás.G40
bucha-prego-tapit-com-cabeca-oval
CHEMITOOL FASTENERS Mushroom Hammer-in Nylon Plug LV047 6x50 Nail Zinc Plated-Tapit Nylon Oval Head Anchor for False Ceiling 6x50 Zinc-coated White.
alicates
KING TONY 254mm Nickel Plated Lock Jaw Grip Pliers- Straight jaw;
- With adjusting screw and release lever;
- Jaw width 10mm, length 30mm.
- With adjusting screw and release lever;
- Jaw width 10mm, length 30mm.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M14X70 A2...- Hexagon Head Bolt Partial Thread Passivated Stainless Steel;
- DIN 931;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 931;
- Material: A2;
- Finishing: Passivated Stainless Steel.
tungsten-carbide-burr-a-cylinder-zya
PFERD High Performance PLAST Ø6x25mm ZYA Cylindrical Carbide Burr- Suitable for GRP and CFRP with up to 40% fiber content;
- Minimizes delamination and fraying with special teeth similar to PCD cutters;
- Especially suitable for use in machines and robots;
- Very low cutting forces;
- High feed speeds and work without impacts or vibration marks, reducing tool and drive wear.
- Minimizes delamination and fraying with special teeth similar to PCD cutters;
- Especially suitable for use in machines and robots;
- Very low cutting forces;
- High feed speeds and work without impacts or vibration marks, reducing tool and drive wear.
twist-drill-din-340-n-hss-g
IRWIN Bit HSS PRO with Conical Stem - DIN 345 Ø34x349 mm- The series of conical shank Bits with Morse taper DIN 345 are standard heavy duty Bits that are used with stationary Bits. Designed for a high resistance to breakage;
- Manufactured according to DIN 345 standards;
- Tip of the chisel of 118 °;
- Design of conical rod with morse;
- Surface finish in black oxide.
- Manufactured according to DIN 345 standards;
- Tip of the chisel of 118 °;
- Design of conical rod with morse;
- Surface finish in black oxide.