ANi Male/Female Threaded ISSO 6150B-12 Profile Quick Fitting SWE 1/4 F
Available
AT023904
- Conical male thread ISO 7 (BSPT)- DIN 2999- BS 21;
- Cylindrical female thread- ISO 228 (BSPP);
- Carbonitrided and zinc-plated steel;
- COMPATIBILITY US-MIL-SPEC-C-4109- CEJN HANSEN 3000- GROMELLE 600- PARKER 30 1/4 RECTUS 24.
- Cylindrical female thread- ISO 228 (BSPP);
- Carbonitrided and zinc-plated steel;
- COMPATIBILITY US-MIL-SPEC-C-4109- CEJN HANSEN 3000- GROMELLE 600- PARKER 30 1/4 RECTUS 24.
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference AT023904 | |||||||||
ANi Male/Female Threaded ISSO 6150B-12 Profile Quick Fitting SWE 1/4 F |
|||||||||
|
Description- Conical male thread ISO 7 (BSPT)- DIN 2999- BS 21; |
||||||||
PRODUCTS DATA
|
|||||||||
16 other products in the same category:
din-975-varao-roscado-1m
CHEMITOOL FASTENERS Threaded Rods - 1m DIN 975 M42 8.8 without Finishing- Threaded rods - 1m without finishing;
- Material: carbon steel;
- DIN 975.
- Material: carbon steel;
- DIN 975.
lv-072-parafuso-sextavado-sandwich
CHEMITOOL FASTENERS Self-Piercing Screws for Sandwich Panel R8004 LV072...- Self Drilling Hex Screw Washer Head for Sandwich Panel White Zinc plated;
- LV072;
- RAL 8004;
- Material: C1022;
- Finishing: White Zinc plated.
- LV072;
- RAL 8004;
- Material: C1022;
- Finishing: White Zinc plated.
din-912-parafuso-cabeca-cilindrica
CHEMITOOL FASTENERS Hexagon Cap Screw Cylindrical Head DIN 912 M16x160 12.9...- Hexagon Cap Screw Cylindrical Plain;
- DIN 912;
- Material: 12.9;
- Finishing: Plain.
- DIN 912;
- Material: 12.9;
- Finishing: Plain.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M18X160 8.8...- Hexagon Head Bolt Partial Thread White Zinc plated;
- DIN 931;
- Material: 8.8;
- Finishing: White Zinc plated.
- DIN 931;
- Material: 8.8;
- Finishing: White Zinc plated.
disco-de-pano-sisal-pre-polimento-grosso
DISCO TR 15010 ST/20Cloth rings are used for pre-polishing and high-gloss polishing with polishing pastes;
-If the intention is to achieve very smooth surface finishes, use several or even all variants successively.
-If the intention is to achieve very smooth surface finishes, use several or even all variants successively.
casquilho-redondo
BRONZE CB1 CASQUILHO 132X98
aspirador-cht10070411640wd0
VEDANTE SISTEMA REFRIGERACAO
home
KING TONY Impact Socket Set 30 Pieces, Star Sockets and Car Wrenches-Set of impact sockets 1, TORX standard E sockets, hammer, extractor, tester, housing, 30 pieces.
mo-ceramica-aco-dureza-50-hrc-branca
M.PLANA 125X16 C.B. A-36lixadora-orbital-cht6010021215025
PINO DO INTERRUPTOR
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M10X80 10.9 Plain- Hexagon Head Bolt Partial Thread Plain;
- DIN 931;
- Material: 10.9;
- Finishing: Plain.
- DIN 931;
- Material: 10.9;
- Finishing: Plain.
escada-aluminio-simples
CHEMITOOL TOOLS Single Step Ladder Square 2,50MT- Steps firmly embedded into the side sections.
- Stabilising base of non-slip rubber feet from 3 metres upwards.
- Plastic tacks on the tops of the profiles.
- Degree of inclination in use - 65º to 75º.
- Stabilising base of non-slip rubber feet from 3 metres upwards.
- Plastic tacks on the tops of the profiles.
- Degree of inclination in use - 65º to 75º.
carbide-cutting-straight-shank-drill
DeWalt Mansory Drill Bit 6x150mm- Rotary/percussion masonry drill bit 130° Douglas form carbide tip.
- Shank diameter of drill bits 10-13 mm is reduced to 9.5 mm.
- Shank diameter of drill bits larger than 13 mm is reduced to 12.7 mm.
- Shank diameter of drill bits 10-13 mm is reduced to 9.5 mm.
- Shank diameter of drill bits larger than 13 mm is reduced to 12.7 mm.