CHAVE DE FILTROS ÓLEO CORREIA 27
Available
FZ015500
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference FZ015500 | |||||
CHAVE DE FILTROS ÓLEO CORREIA 27 |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
tungsten-carbide-burr-a-cylinder-zya
FRESA TUNGS. ZYA 1625/8 Z3PCylindrical burr according to DIN 8032 with circumferential and end cut according to DIN 8033
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M20X150 8.8 Plain- Hexagon Head Bolt Partial Thread Plain;
- DIN 931;
- Material: 8.8;
- Finishing: Plain.
- DIN 931;
- Material: 8.8;
- Finishing: Plain.
sbd-spare-parts
SUBCONJMONT.DE MESA
din-7972c-parafuso-cabeca-embeber-fenda
CHEMITOOL FASTENERS Tapping Screw Countersunk Head Slotted DIN 7972C 2,9x19...- Slotted Countersunk Head Tapping Screw White Zinc Plated;
- DIN 7972C;
- Material: Steel.
- DIN 7972C;
- Material: Steel.
fasteners-and-fixings
CHEMITOOL FASTENERS Slotted Raised Countersunk Head Screw DIN 964 5/32X1/4 Plain- Raised Countersunk Head Screw PHILLIPS Plain;
- DIN 964;
- Finishing: Plain.
- DIN 964;
- Finishing: Plain.
sistema-de-extracao-de-poeiras
DEWALT POWER-TOOLS Dust Extraction for L-Shape SDS HammerThe D25300D Rotary Hammer Dust Extraction filters dust and debris during high performance drilling. Dust extraction lasts two seconds after drill is switched off for an efficient clean.
sds-max-concrete-hammer-drill-4-cutters
IRWIN Construction Bit with 4 Cutting Angles SPEEDHAMMER MAX IRWIN Ø24x320 mm- Special design of IRWIN® tip;
- The head occupies 80% of the workload;
- 53 ° perforation head and single slot design;
- With four cutting angles;
- Chromium-vanadium steel body;
- Finish with double shot blasting.
- The head occupies 80% of the workload;
- 53 ° perforation head and single slot design;
- With four cutting angles;
- Chromium-vanadium steel body;
- Finish with double shot blasting.
sds-max-concrete-hammer-drill-4-cutters
CHEMITOOL CUTTING Ø35,0X370MM SDS-MAX Hammer Drill Bit - CX4 Performance- Optimum quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 12,0 to 52mm diameter;
- Long tool life;
- Head: 4 cutters tungsten carbide;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Heavy electro-pneumatic hammer.
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 12,0 to 52mm diameter;
- Long tool life;
- Head: 4 cutters tungsten carbide;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Heavy electro-pneumatic hammer.
lamela-de-perno-para-metal
CHEMITOOL Aluminum Oxide Pernum Blade Ø60X40X6 A80
cutting-tools
PFERD Combidisc Abrasive Discs Ceramic Oxide Grain CO-COOL CDR G120 50 mm- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.