EXTRATOR DE PERNOS 10-16
Ready to Ship
FZ2001
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference FZ2001 | |||||
EXTRATOR DE PERNOS 10-16 |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
aco-38-hrc-desbaste-de-bordo
MO MONTADA KE2032 6AR 30 O 5V
home
STAHLWILLE Flat Nose Plier, Long, with Cutter 140 mmDesigned for gripping and manipulating electronic components, long, thin, flat serrated jaws, induction hardened cutting edges, approx. 60 HRC, for soft and hard wires.
sds-plus-hammer-drill-3-cutters
DeWalt SDS Plus Extreme Bit 2 Cuts 10x260mm- The Innovative EXTREME 2® SDS-Plus drill bit is amongst the best in terms of its speed, life and endurance.
- Superior carbide grade for long life and greater durability.
- Optimised flute design allows efficient debris removal.
- Superior carbide grade for long life and greater durability.
- Optimised flute design allows efficient debris removal.
formao-cabo-madeira
FORMÃO CABO MADEIRA 35MM
carbide-cutting-straight-shank-drill
DeWalt Mansory Drill Bit 12x150mm- Rotary/percussion masonry drill bit 130° Douglas form carbide tip.
- Shank diameter of drill bits 10-13 mm is reduced to 9.5 mm.
- Shank diameter of drill bits larger than 13 mm is reduced to 12.7 mm.
- Shank diameter of drill bits 10-13 mm is reduced to 9.5 mm.
- Shank diameter of drill bits larger than 13 mm is reduced to 12.7 mm.
agrafadores-e-pistolas-de-prego
DeWalt Nailer of Structures for Nails in Coil for 50-90mm longCoil nailer with a sequential firing mode, magnesium structure and depth adjustment setting;
-Magazine capacity: up to 300 nails.
-Magazine capacity: up to 300 nails.
home
BRALO Standard rivet Aluminium/Steel 3.2x6mm White- Different types of materials can be joined, with different types of manufacturing.
- Wide range of thicknesses to be riveted.
- Fast, economic and high quality assembly.
- Wide range of thicknesses to be riveted.
- Fast, economic and high quality assembly.
home
TERRAX by RUKO 170-Piece Set of Twist Drills DIN 338 Type N, HSS-G with Cross...- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M30X90 8.8 White...- Hexagon Head Bolt Screw Full Thread White Zinc plated;
- DIN 933;
- Material: 8.8;
- Finishing: White Zinc plated.
- DIN 933;
- Material: 8.8;
- Finishing: White Zinc plated.
home
ANi Male Threaded Elbow Fitting 50/C 1/4 M ø 10 mm- Conical male thread ISO 7 (BSPT)- DIN 2999- BS 21 with PTFE.
sharpening-stone
PFERD CARBIDE 25x13x150mm SiC320 Polishing Stone Square- Long tool life.
- High dimensional stability.
- High abrasive performance.
- Even stock removal.
- Fine surface finish.
- High dimensional stability.
- High abrasive performance.
- Even stock removal.
- Fine surface finish.
home
CHEMITOOL BY PAYPER Blue Navy Padded Soft-Shell Jacket Creek S- Thermal insulation level 3;
- Certified to work in environments as low as -5°C;
- Waterproof;
- Windproof;
- Breathable;
- Stretch;
- Fleece lined collar;
- Multi-pockets;
- Reflective stripe on back and hood.
- Certified to work in environments as low as -5°C;
- Waterproof;
- Windproof;
- Breathable;
- Stretch;
- Fleece lined collar;
- Multi-pockets;
- Reflective stripe on back and hood.