FUSO PARA EXTRATOR
Available
FZ243003
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference FZ243003 | |||||
FUSO PARA EXTRATOR |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
engenho-de-furar-de-coluna
ENGENHO DE FURAR VERTICAL 5040
cutting-tools
PFERD Arbors With Clamping Flange 25.4 mm- For mounting PFERD unmounted flap wheels.
The clamping flanges are designed to lie countersunk in the tool.
- Advantages: Can be used face-down very close to edges and in angles thanks to special clamping system.
The clamping flanges are designed to lie countersunk in the tool.
- Advantages: Can be used face-down very close to edges and in angles thanks to special clamping system.
single-cut-tap-npt-hss
Single-cut Tap M ≈ DIN 352 HSS (Ø 4,20 mm) RUKO
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagonal Screw UNC 9/16X2 ANSI B1821-Hexagonal UNC Screw 9/16X2 ANSI B1821.
din-912-parafuso-cabeca-cilindrica
CHEMITOOL FASTENERS Hexagon Cap Screw Cylindrical Head DIN 912 M12x110 8.8...- Hexagon Cap Screw Cylindrical Head White Zinc plated;
- DIN 912;
- Material: 8.8;
- Finishing: White Zinc plated.
- DIN 912;
- Material: 8.8;
- Finishing: White Zinc plated.
cutting-tools
PFERD Abrasive Spiral Bands Ceramic Oxide Grain CO-COOL Cylindrical G120 30 x...- For aggressive grinding with maximum stock removal rate on hard and tough materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
home
STAHLWILLE Socket 1/4' nº 40DL 13 mmExtra deep, metric sizes: E DIN EN 3710, E DIN EN 3709, DIN 3124/ISO 2725-1, ASME B 107.5M, American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E, HPQ® high performance steel, chrome plated.
line-lasers
DeWalt 10,8V 5 Spot CrossThe DEWALT DCE0825D1G 5 Spot Cross Line Laser Green projects a full cross line (horizontal & vertical) and 5 independent spot points. The cross line function features a 150 fan angle, providing ample coverage with little set-up time. It has an integrated magneticbracket, so it can be directly mounted to metal track, ensuring accurate projections all around. The body of the level is IP54 rated, meaning it is resistant to debris/water. The overmolded housing and thick glass protect the tool and helps maintain calibration under jobsite conditions.
din-1481-cavilha-elastica
CHEMITOOL Spring-Type Straight Pin DIN 1481 2,5x20 Without Finishing- Spring-Type Straight Pin Without Finishing;
- DIN1481;
- Material: steel.
- DIN1481;
- Material: steel.
rolling-bearings
ROLAMENTO - 92458 C
twist-drill-din-340-n-hss-g
IRWIN Bit HSS PRO with Conical Stem - DIN 345 Ø26x286 mm- The series of conical shank Bits with Morse taper DIN 345 are standard heavy duty Bits that are used with stationary Bits. Designed for a high resistance to breakage;
- Manufactured according to DIN 345 standards;
- Tip of the chisel of 118 °;
- Design of conical rod with morse;
- Surface finish in black oxide.
- Manufactured according to DIN 345 standards;
- Tip of the chisel of 118 °;
- Design of conical rod with morse;
- Surface finish in black oxide.