bucha-metalica-ch-parafuso-sextavado
CHEMITOOL FASTENERS Sleeve Anchor for Medium Loads with Flat Head Screw lV056...-Bushing CH Screw C/E A2 M10X70.
BASE GIRATORIA PARA PRENSA
Available
FZ3310098
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference FZ3310098 | |||||
BASE GIRATORIA PARA PRENSA |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
retificadora-direita-pneumatica
MAQUINA PG 3/250 S
sds-plus-hammer-drill-3-cutters
DeWalt SDS Plus Extreme Bit 2 Cuts 12x300mm- The Innovative EXTREME 2® SDS-Plus drill bit is amongst the best in terms of its speed, life and endurance.
- Superior carbide grade for long life and greater durability.
- Optimised flute design allows efficient debris removal.
- Superior carbide grade for long life and greater durability.
- Optimised flute design allows efficient debris removal.
home
KING TONY 3/8' 93 mm Cup Type Oil Filter Wrench-Filter extractor is used to change oil and filter of cars.
vedantes
VEDANTE
home
CHEMITOOL FASTENERS Slotted Countersunk Head Wood Screw DIN 97 1.1/2X14...- Slotted Countersunk Head Wood Screw Yellow Passivated;
- DIN 97;
- Finishing: Yellow Passivated.
- DIN 97;
- Finishing: Yellow Passivated.
hammer-drills
Berbequim combi 18V bucha 13mm dest. 2ve-The tool is equipped with an impact mode - 0 - 7150 / 0 - 27300 bpm. -The brushless motor and the electronic protection against overload and deep battery discharge guarantee a long service life.
din-472-freio-de-seguranca-interior
CHEMITOOL FASTENERS Internal Retaining Ring DIN 472 25mm 4.8 without Finishing-Safety Indoor Brake DIN 472 25mm 4.8 unfinished.
din-912-parafuso-cabeca-cilindrica
CHEMITOOL FASTENERS Hexagon Cap Screw Cylindrical Head DIN 912 M16X240 8.8 Plain- Hexagon Cap Screw Cylindrical Plain;
- DIN 912;
- Material: 8.8;
- Finishing: Plain.
- DIN 912;
- Material: 8.8;
- Finishing: Plain.
lamela-de-perno-scotch-tubo-perfil
PFERD Non-Woven Tools, Polinox Mounted Grindind Wheels - Aluminium Oxide A...- The non-woven abrasive material is arranged in multiple (axial) disc layers.
- Since the individual non-woven discs are not interconnected, the abrasive surface adapts easily to different workpiece contours, e.g. when working on profiles or pipes.
- Since the individual non-woven discs are not interconnected, the abrasive surface adapts easily to different workpiece contours, e.g. when working on profiles or pipes.
