PERFURADOR HIDRÁULICO Ø15
Available
FZ54/15H
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference FZ54/15H | |||||
PERFURADOR HIDRÁULICO Ø15 |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
din-7505a-parafuso-cabeca-embeber
CHEMITOOL FASTENERS WOODPRO Chipboard Screw Countersunk Head POZIDRIV w/Ribs...- WOODPRO Chipboard Screw Countersunk Head POZIDRIV w/Ribs Full Thread White Zinc plated;
- DIN 7505A, LV901;
- Material: C1022;
- Finishing: White Zinc plated.
- DIN 7505A, LV901;
- Material: C1022;
- Finishing: White Zinc plated.
home
EXENA 40 S1P Composite Montreal Shoes- Suede leather upper.
- Breathable, abrasion-resistant synthetic fabric lining.
- Breathable, abrasion-resistant synthetic fabric lining.
home
LORCH feed roller 0,6 / 0,8 steel (type 37)The drive rollers of the wire feeder units must conform to the welded wire. The 4 roller unit of these systems always requires 2 feed rollers.
Suitable for: M-Pro 170/210/250/300/150 CuSi / 200 CuSi / and M 222/242
Suitable for: M-Pro 170/210/250/300/150 CuSi / 200 CuSi / and M 222/242
lamela-de-nucleo-para-metal
LAMELA 6116 FR 16525/25,4 A400
home
STAHLWILLE Socket 1/4' nº 40 3 mmMetric sizes: DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3709 (test loads), American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads),
HPQ® high performance steel, chrome plated.
HPQ® high performance steel, chrome plated.
home
KING TONY 1/2' 175mm Inch Combination Wrench-Ángulo final abierto de 15 grados.
-15 grados de desplazamiento del eje en el extremo del anillo.
-Aleación de acero al cromo-vanadio.
-15 grados de desplazamiento del eje en el extremo del anillo.
-Aleación de acero al cromo-vanadio.
drill-drivers
BLACK+DECKER 7,2V 1,5Ah Lithium-ion Ultra Compact Drill- For all wood drilling tasks up to 20mm;
- For any domestic screwing task;
- For furniture assembly;
- To hang paintings and install curtains and bars for curtains.
- For any domestic screwing task;
- For furniture assembly;
- To hang paintings and install curtains and bars for curtains.
chave-de-caixa-curta-impacto-1-2
KING TONY 3/4' - 1/2' 12 Points Standard Impact Socket- ANSI/ASME B107.2;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
impermeabilizante-base-de-ms-polimero
CHEMICOAT Liquid Membrane Waterproofing MS 1kg White- Resistant to weathering and U.V. rays.
- Excellent adhesion on various types of substrates.
- Can be applied on damp surfaces.
- Paintable after drying.
- Is odourless and isocyanate free.
- Non-corrosive when boning to metal.
- Permanent elasticity and excellent adhesion.
- Interior and exterior use.
- No shrinkage.
- Remains flexible at low (-40°C) and high (+90°C) temperatures.
- Ecological (no solvents or isocyanates).
- It is permeable to water vapour.
- Applicable on horizontal and vertical surfaces.
- Transitable with use of reinforcing mesh between layers.
- Easy to apply.
- High performance 1.5 to 3.0 Kg/m2.
- Excellent adhesion on various types of substrates.
- Can be applied on damp surfaces.
- Paintable after drying.
- Is odourless and isocyanate free.
- Non-corrosive when boning to metal.
- Permanent elasticity and excellent adhesion.
- Interior and exterior use.
- No shrinkage.
- Remains flexible at low (-40°C) and high (+90°C) temperatures.
- Ecological (no solvents or isocyanates).
- It is permeable to water vapour.
- Applicable on horizontal and vertical surfaces.
- Transitable with use of reinforcing mesh between layers.
- Easy to apply.
- High performance 1.5 to 3.0 Kg/m2.
home
STAHLWILLE Socket 1/4' nº 40 11 mmMetric sizes: DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3709 (test loads), American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads),
HPQ® high performance steel, chrome plated.
HPQ® high performance steel, chrome plated.
calca-stretch-bolso-pivotante
DASSY Flux Painter Stretch Trousers n.º 44 +/- 245 g/m² White/Grey'- Painter trousers with stretch, holster and knee pockets
- The DASSY® FLUX is the right choice for heavy duty work, thanks to its durable fabric and Cordura® reinforcements. What is more, the streamlined design ensures freedom of movement. The mechanical stretch main fabric is skillfully combined with 4-way stretch Cordura® inserts, exactly where you need them. And thanks to the spacious and practical holster pockets you always have your tools at hand.
- PESCO 41, +/- 245 g/m²
- The DASSY® FLUX is the right choice for heavy duty work, thanks to its durable fabric and Cordura® reinforcements. What is more, the streamlined design ensures freedom of movement. The mechanical stretch main fabric is skillfully combined with 4-way stretch Cordura® inserts, exactly where you need them. And thanks to the spacious and practical holster pockets you always have your tools at hand.
- PESCO 41, +/- 245 g/m²
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 2,40mm)- Main application Steel (N / mm²) <900 and cast iron
- Secondary application Brass and bronze
- Secondary application Brass and bronze
fresa-hss-forma-tipo-chama
PFERD Rotary Cutters - Cylindrical Shape With Radius End HSS C 0616/6 Cut 1Cylindrical rotary cutter with radius end.
home
DASSY Roma Two-Tone Work Shorts n.º 66 +/- 245 g/m² White/Grey'- Sturdy and practical short two-tone work trousers. The regular fit is comfortable and sits nicely around the waist thanks to theadjustable back elastic.
- PESCO 61, +/- 245 G/M²
- PESCO 61, +/- 245 G/M²