PERFURADOR HIDRÁULICO Ø51
Ready to Ship
FZ54/51H
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference FZ54/51H | |||||
PERFURADOR HIDRÁULICO Ø51 |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
home
IRWIN Bit for Metal HSS PRO - DIN 338 Ø19x198 mm- DIN 338 series, suitable for various industrial and commercial applications in non-cast steel, non-ferrous metals, cast iron and plastics.
- Division point of 118 °;
- Great resistance;
- Excellent Biting performance;
- High precision;
- Best quality steel.
- Division point of 118 °;
- Great resistance;
- Excellent Biting performance;
- High precision;
- Best quality steel.
home
FORZA 56 Series Round Sheet Punch with Stainless Steel Bearing 2mm Ø55mm- High-strength bolts: up to 140 kg/mm²;
- Built-in bearing: reduces effort by 50%;
- Less fatigue, higher productivity;
- Ground edge for clean, precise cuts.
- Built-in bearing: reduces effort by 50%;
- Less fatigue, higher productivity;
- Ground edge for clean, precise cuts.
bucha-segmentada
CHEMITOOL FASTENERS Wedge Anchor for Heavy Loads LV205 M16X220 White Zinc plated- Segmented Stainless Steel Bushing M16X220 LV205.
fita-de-serra-para-metal
LENOX 4450x34x1,07 Z4/6 Classic Saw Band- Aluminum / non-ferrous applications;
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.
disco-de-fibra-para-inox
PFERD Fibre Discs Fibre Discs FS Aluminium Oxide A-COOL G150 180 mm- For universal grinding work from fine to very fine grinding on materials which do not conduct heat well, e.g. stainless steel (INOX).
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Aluminium oxide A-COOL.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Aluminium oxide A-COOL.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M5X25 8.8 without...- Hexagon Head Bolt Screw Full Thread Plain;
- DIN 933;
- Material: 8.8;
- Finishing: Plain.
- DIN 933;
- Material: 8.8;
- Finishing: Plain.
armario-guarda-roupa-cacifo
CHEMITOOL Six Half Doors Locker
acessories
CHEMITOOL CUTTING Pilot Drill Ø6,35x102mm- Fully ground.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.
lamela-de-perno-para-metais-extra-duros
PFERD Mounted Flap Wheels 6 x 40 mm Silicon Carbide SiC G80 30 x 10 mm- For universal grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics.
- Particularly recommended for use on titanium alloys.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Abrasive: Silicon carbide SiC.
- Particularly recommended for use on titanium alloys.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Abrasive: Silicon carbide SiC.
tacometro-digital
BELFLEX Digital Tachometer UT372- Supplied with software, USB cable and reflective tape;
- In accordance with standards EN 61326-1;
- Range selection: 10-99, 100-999, 1000-9999, 10000-99999 rpm.
- In accordance with standards EN 61326-1;
- Range selection: 10-99, 100-999, 1000-9999, 10000-99999 rpm.