GRAMPOS 28MM
Available
A5965
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference A5965 | |||||
GRAMPOS 28MM |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
din-471-freio-de-seguranca-exterior
CHEMITOOL FASTENERS External Retaining Ring DIN 471 67mm 4.8 without Finishing-External Safety brake DIN 471 67mm 4.8 without finishing.
pvc-safety-footwear
CHEMITOOL SAFETY S5 PVC Boot With Steel Toecap and Insole N44- Polyester and PVC/Nitrile, metal eyelets.
- Breathable, antibacterial and abrasion-resistant polyester lining.
- Breathable, antibacterial and abrasion-resistant polyester lining.
sds-max-concrete-hammer-drill-4-cutters
IRWIN Construction Bit with 4 Cutting Angles SPEEDHAMMER MAX IRWIN Ø40x920 mm- Special design of IRWIN® tip;
- The head occupies 80% of the workload;
- 53 ° perforation head and single slot design;
- With four cutting angles;
- Chromium-vanadium steel body;
- Finish with double shot blasting.
- The head occupies 80% of the workload;
- 53 ° perforation head and single slot design;
- With four cutting angles;
- Chromium-vanadium steel body;
- Finish with double shot blasting.
aco-38-hrc-uso-geral
MO MONTADA ZY3232 6ADW 46 M 5V
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Type N, HSS-G Dark (Ø 1,25mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Full Thread - Fine Pitch DIN 961 M16X50...
veios-e-eixos
VEIO DA BORBOLETA
multi-purpose-gloves
SHOWA Nylon Lined PU Glove B0500 Size SThe Nylon Glove B0500 is designed for precision and cleanliness, the general-purpose glove comfortable fit to maximise sensitivity and control. control. A permeable liner and breathable back reduce perspiration, and the seamless lining prevents irritation. An elastic, low-lint construction is resistant to deformation and preserves and preserves the glove's fit.
home
PFERD Combidisc Abrasive Discs Diamond CDR G126 38 mm- Exceptionally suitable for work on wear- resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
- Abrasive: Diamond.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
- Abrasive: Diamond.
