RYOBI 3 in 1 Painting Station
Ready to Ship
FPR300
- Sistema de pintura para duas pessoas, permite que dois usuários pintem simultaneamente com um rolo e dêem acabamento às bordas;
- O fluxo de tinta ajustável permite uma aplicação uniforme da tinta;
- Bomba reversível para limpeza rápida e fácil;
- A lata padrão de 2,5 litros cabe diretamente no tanque de tinta para preparação rápida;
- Wet technologyTM mantém um fluxo constante entre a pistola ou rolo e o tanque e garante resultados perfeitos a cada time;
- Punho GripZoneTM tecnologiaComprimento do cabo 2,5 mVazão 20,5;
- Tamanho do eixo 228 mm;
- Capacidade do tanque 4.500 ml.
- O fluxo de tinta ajustável permite uma aplicação uniforme da tinta;
- Bomba reversível para limpeza rápida e fácil;
- A lata padrão de 2,5 litros cabe diretamente no tanque de tinta para preparação rápida;
- Wet technologyTM mantém um fluxo constante entre a pistola ou rolo e o tanque e garante resultados perfeitos a cada time;
- Punho GripZoneTM tecnologiaComprimento do cabo 2,5 mVazão 20,5;
- Tamanho do eixo 228 mm;
- Capacidade do tanque 4.500 ml.
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference FPR300 | |||||||
RYOBI 3 in 1 Painting Station |
|||||||
|
Description- Sistema de pintura para duas pessoas, permite que dois usuários pintem simultaneamente com um rolo e dêem acabamento às bordas; |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
home
BELFLEX Drilling Machine - Bench Type Transmission by Belt TB 13/5B- Transmision by belt;
- Emergency stop switch;
- Table turning around column 360º;
- Wivelling table at 45º;
- Safety limit swith at cover;
- Chuck guard.
- Emergency stop switch;
- Table turning around column 360º;
- Wivelling table at 45º;
- Safety limit swith at cover;
- Chuck guard.
home
ANI Quick Connect Gear - SWE 1/4 M Threaded Male/Female- Conical male thread ISO 7 (BSPT)- DIN 2999- BS 21;
- Cylindrical female thread- ISO 228 (BSPP);
- Carbonitrided and zinc-plated steel;
- COMPATIBILITY US-MIL-SPEC-C-4109- CEJN HANSEN 3000- GROMELLE 600- PARKER 30 1/4 RECTUS 24.
- Cylindrical female thread- ISO 228 (BSPP);
- Carbonitrided and zinc-plated steel;
- COMPATIBILITY US-MIL-SPEC-C-4109- CEJN HANSEN 3000- GROMELLE 600- PARKER 30 1/4 RECTUS 24.
fasteners-and-fixings
CHEMITOOL FASTENERS Slotted Raised Countersunk Head Screw DIN 964 M6X70 4.8...- Raised Countersunk Head Screw PHILLIPS Passivated Stainless Steel;
- DIN 964;
- Material: 4.8;
- Finishing: Passivated Stainless Steel.
- DIN 964;
- Material: 4.8;
- Finishing: Passivated Stainless Steel.
pvc-safety-footwear
BOTA PVC PRETA COM FORRO JERSEY
home
BETA 96TK T-handle 3mm Spanner-The Beta 96TK 3mm offset hexagonal wrench from ITS is a double-immersion T-handle tool with high torque transfer.
home
DeWalt Fine thread 3.5x35mm- Drywall screws with bugle head
- 50 screws collated
- Constant and sharp needle point for fast and easy installation
- 50 screws collated
- Constant and sharp needle point for fast and easy installation
fasteners-and-fixings
CHEMITOOL FASTENERS Mushroom Head Square Neck Bolt DIN 603 1/2X75 4.8 Plain- Mushroom Head Square Neck Bolt Plain;
- DIN 603;
- Material: 4.8;
- Finishing: Plain.
- DIN 603;
- Material: 4.8;
- Finishing: Plain.
din-966-parafuso-cabeca-lentilha-ph
CHEMITOOL FASTENERS Raised Countersunk Head Screw PHILLIPS DIN 966 M5X20 A2...- Raised Countersunk Head Screw PHILLIPS Passivated Stainless Steel;
- DIN 966;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 966;
- Material: A2;
- Finishing: Passivated Stainless Steel.
brocas-sds-plus-com-4-cortantes
CHEMITOOL CUTTING Ø15X260MM SDS-PLUS Hammer Drill Bit - CX4 Performance- Excellent quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 4,0 to 26mm diameter;
- Long tool life;
- Head: 4 tungsten carbide cutters;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Lightweight electro-pneumatic portable hammer.
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 4,0 to 26mm diameter;
- Long tool life;
- Head: 4 tungsten carbide cutters;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Lightweight electro-pneumatic portable hammer.
disco-de-fibra-para-metal
CHEMITOOL CUTTING Ø115x22mm A80 Aluminium Oxide A Fibre Disc- High performance;
- High quality surface finish;
- Excellent adaptation to contours;
- Stability process and job safety;
- Long tool life;
- Suitable for: Steel, Non-Ferrous Metal, Cast Iron, Cast Steel;
- Abrasive: Aluminium Oxide A;
- Suitable Machines: Angle Grinders.
- High quality surface finish;
- Excellent adaptation to contours;
- Stability process and job safety;
- Long tool life;
- Suitable for: Steel, Non-Ferrous Metal, Cast Iron, Cast Steel;
- Abrasive: Aluminium Oxide A;
- Suitable Machines: Angle Grinders.
colete-sarja-standard
CHEMITOOL SAFETY Reversible Vest in Polyester PONGEE Size XL- Face 1: 100% pongee / PVC.
- Face 2: 260g/m2 fleece.
- Lower and upper pockets.
- Adjustable at the waist through elastic cord with plastic tips.
- ZIP closing.
- Face 2: 260g/m2 fleece.
- Lower and upper pockets.
- Adjustable at the waist through elastic cord with plastic tips.
- ZIP closing.