ESCOVA Nº56 P/ EAG2000RS
Available
RY5131026838
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference RY5131026838 | |||||||
ESCOVA Nº56 P/ EAG2000RS |
|||||||
 |
Description |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
broca-retificada-36-hsse-co-5-ambar
RUKO Spiral Bits DIN 338 Type VA, HSSE-Co5 (Ø 16,50mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics
- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics
cutting-tools
PFERD Combidisc Abrasive Disc Holders W SBH 38- Matching arbors for COMBIDISC grinding tools.
home
KING TONY 1/4' M6 XZN® Bit- Silicon chrome vanadium alloy steel (S2)
- Anti-rust oiled, sand-blasted
- Total length : 25 mm;
- DIN 65254.
- Anti-rust oiled, sand-blasted
- Total length : 25 mm;
- DIN 65254.
lamela-de-perno-para-metais-duros
PFERD Mounted Flap Wheels Shank 6 x 40 mm Ceramic Oxide Grain CO-COOL G80 30...- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
lamela-de-perno-para-metal
PFERD Mounted Flap Wheels Shank 6 mm Aluminium Oxide A G350 x 15 mm20- For universal applications from coarse to fine grinding.
- Abrasive: Aluminium oxide A.
- Abrasive: Aluminium oxide A.
home
DeWalt 1/3 Mesh Sanding Sheet G120- Mesh sanding sheets last at least four times longer than traditional DeWalt sandpaper sheets.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
home
IRWIN BLUE GROOVE 4x Flat Bit 10 mmx400 mm- Sharp double ends;
- Thicker cutting edge;
- Blue Groove groove tip and groove;
- 10% longer stem;
- 1/4 / 6 mm hexagon stem;
- Can not be used with Bit bit extensions or Bit chuck.
- Thicker cutting edge;
- Blue Groove groove tip and groove;
- 10% longer stem;
- 1/4 / 6 mm hexagon stem;
- Can not be used with Bit bit extensions or Bit chuck.
