din-472-freio-de-seguranca-interior
CHEMITOOL FASTENERS Internal Retaining Ring DIN 472 41mm 4.8 without Finishing-Safety Indoor Brake DIN 472 41mm 4.8 unfinished.
MOBILITY SYSTEM 1/2 Bandeja 12 V L-BOXX
Available
BH1600A002VM
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference BH1600A002VM | |||||||
MOBILITY SYSTEM 1/2 Bandeja 12 V L-BOXX |
|||||||
|
Description |
||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
en-14399-4-parafuso-sextavado-estruturas
CHEMITOOL FASTENERS Hexagon Head Screw DIN 14399-4 STEEL 10.9 HOT GALVANIZED...-Hexagon Head Screw DIN 14399-4 STEEL 10.9 HOT GALVANIZED M24x85.
home
KING TONY Wheel Lock Screw Socket Set BMW 21 (un.)-This tool is used to allow customers to service their vehicles even if they lose their key. -Applicable for installing and removing locks on most BMW models.
home
DeWalt 1/4 Mesh Sanding Sheet G80- Mesh sanding sheets last at least four times longer than traditional DeWalt sandpaper sheets.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.
home
KING TONY Standard 6 Points Metric Socket 48mm 3/4'- Standard Socket;
- DIN 3124, ISO 2725-1;
- Chrome vanadium alloy steel;
- Polished, chrome plated;
- 4 ball retaining grooves.
- DIN 3124, ISO 2725-1;
- Chrome vanadium alloy steel;
- Polished, chrome plated;
- 4 ball retaining grooves.
home
STAHLWILLE Extension with Wobble-Drive 3/8' Size 5Swivel angle 15° each side, max. torque 80 N·m.
rolling-bearings
ROLAMENTO - 305 (NJ)
home
STAHLWILLE Socket 3/4' nº 55 33 mmDIN 3124/ISO 2725-1, ASME B 107.5 M, AS-drive and HPQ® high performance steel up to size 38, chrome plated.
din-7504k-parafuso-cabeca-sextavada-redu
CHEMITOOL FASTENERS Self Drilling Screw Hexagonal With Flange Reduced Drill...-Drilling, tapping and screwing in a single operation.
home
17 Pieces KING TONY Box of Bearing Extractors With Inertia Mass-Three types of use: internal/external extractor, plate extractor, tooth extractor.
-5 lbs/2.2 kg sliding hammer with 500 mm shaft makes it more powerful.
-Use to remove vehicle hub, rear axle, bearing or repair dent, etc.
-5 lbs/2.2 kg sliding hammer with 500 mm shaft makes it more powerful.
-Use to remove vehicle hub, rear axle, bearing or repair dent, etc.
brocas-sds-plus-com-4-cortantes
CHEMITOOL CUTTING Ø18X460MM SDS-PLUS Hammer Drill Bit - CX4 Performance- Excellent quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 4,0 to 26mm diameter;
- Long tool life;
- Head: 4 tungsten carbide cutters;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Lightweight electro-pneumatic portable hammer.
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 4,0 to 26mm diameter;
- Long tool life;
- Head: 4 tungsten carbide cutters;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Lightweight electro-pneumatic portable hammer.
abracadeira-reforcada-isofonica-m8m10
CHEMITOOL FASTENERS Isophonic Reinforced Clamp M8/M10 W1 Ø115 Carbon Steel...- Isophonic clamps allow quick and easy installation of steel, copper and PVC pipes.