home
STAHLWILLE Double Ended Open Ring Spanners, Angled 5/8 x 3/4'Bi-hexagon, DIN 3118/ISO 3318 (metric sizes), Chrome Alloy Steel, chrome plated.
KRAFFT 20kg KL Grease
Ready to Ship
KF15407
Lithium greases (NLGI 2). High protection against corrosion. Good performance in presence of water. Temperature range from -30ºC up to +130ºC
Add to cart
40,00 €
and shipping is free
|
|||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference KF15407 | |||||||||||||||||||
KRAFFT 20kg KL Grease |
|||||||||||||||||||
|
DescriptionLithium greases (NLGI 2). High protection against corrosion. Good performance in presence of water. Temperature range from -30ºC up to +130ºC |
||||||||||||||||||
PRODUCTS DATA
|
|||||||||||||||||||
SPECIFICATIONS
|
|||||||||||||||||||
16 other products in the same category:
home
PFERD Combidisc Abrasive Discs Diamond CDR G126 25 mm- Exceptionally suitable for work on wear- resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
- Abrasive: Diamond.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
- Abrasive: Diamond.
home
KING TONY 25~250 in. lb. Adjustable Torque Wrench 34323-1B-Torque: 55-250 In.lb.
-Vanadium stainless steel material.
-Precision ± 4%.
-Locking and unlocking mode on the body to be adjusted.
-Vanadium stainless steel material.
-Precision ± 4%.
-Locking and unlocking mode on the body to be adjusted.
home
KING TONY Ball Hex Key Long Arm H10mm- Long arm with ball point type;
- DIN ISO 2936;
- Material - SNCM - V alloy steel;
- Finishing - chrome plated.
- DIN ISO 2936;
- Material - SNCM - V alloy steel;
- Finishing - chrome plated.
home
PATTEX Extreme Extra Strong Glue-State-of-the-art glue, with extraordinary strength, transparent and extra-fast to permanently glue and repair most materials.
home
LISTA VDI 50 Tool Holder RED- Tool holder VDI 50 cylindrical with snap fastener, for partitioning scheme E, red.
home
KING TONY 11/16' - 3/8' 6 Points Deep Impact Socket- ANSI/ASME B107.2;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
home
IRWIN Stepped Conical Bit 3M with 7 Holes (6 mm - 18 mm), increase every 2 mm- Hole Size: 6 mm - 18 mm (2 mm increments);
- Automatic centering point;
- Chromium-vanadium steel;
- Double grooved cut edge with double rectified;
- Ideal for Biting holes in thin materials;
- Flat Stem;
- Sizes laser engraved.
- Automatic centering point;
- Chromium-vanadium steel;
- Double grooved cut edge with double rectified;
- Ideal for Biting holes in thin materials;
- Flat Stem;
- Sizes laser engraved.
home
RUKO Male To Open Combined-Bit Threads 'Short' HSS, Rectified (M8)- Main application Steel (N / mm²) <800, steel (N / mm²) <1000, stainless steel and brass
- Secondary application Aluminum, bronze, plastics and cast iron
- Secondary application Aluminum, bronze, plastics and cast iron
home
STAHLWILLE Double Ended Ring Spanners STARTER 11x13 mmISO 3318, Chrome Alloy Steel, chrome plated.