KRAFFT 125ml Vaseline
Ready to Ship
KF17102
Highly refined and low viscosity Vaseline oil. It is mainly used as a lubricant and protector in doors, locks, small mechanisms andhand tools.
Add to cart
40,00 €
and shipping is free
|
|||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference KF17102 | |||||||||||||||
KRAFFT 125ml Vaseline |
|||||||||||||||
|
DescriptionHighly refined and low viscosity Vaseline oil. It is mainly used as a lubricant and protector in doors, locks, small mechanisms andhand tools. |
||||||||||||||
PRODUCTS DATA
|
|||||||||||||||
SPECIFICATIONS
|
|||||||||||||||
16 other products in the same category:
home
4LW Llaves Ajustables 4 REF:/100mm Capacidad-The IRWIN Vise-Grip Locking Key locks in nuts, bolts and other hexagonal fasteners on three sides, unlike conventional keys that hold on only two sides.
chaves-de-parafusos-fenda
STANLEY® FATMAX® Flared Screwdriver 3x100mm
fasteners-and-fixings
CHEMITOOL FASTENERS Slotted Countersunk Head Screw DIN 963 3/16X3 BSW 4.8 Plain- Slotted Countersunk Head Screw Plain;
- DIN 963;
- Material: 4.8;
- Finishing: Plain.
- DIN 963;
- Material: 4.8;
- Finishing: Plain.
Ready to Ship
- New
din-96-parafuso-cabeca-oval
CHEMITOOL FASTENERS Slotted Raised Countersunk Head Wood Screws DIN 96 N23...- Slotted Raised Countersunk Head Wood Screws Brass;
- DIN 96;
- Finishing: Brass.
- DIN 96;
- Finishing: Brass.
parafusos-rosca-para-chapa
CHEMITOOL FASTENERS Tapping Screw Pan Head TORX Recess DIN 7981C 4,8x45 A2...- Tapping Screw Pan Head TORX Recess Passivated Stainless Steel;
- DIN 7981C;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 7981C;
- Material: A2;
- Finishing: Passivated Stainless Steel.
case-sets
RUKO Set Of 19 Spiral Bits DIN 338 Tipo VA, HSSE-Co RUKO- Set of 19 spiral drill bits DIN 338 type VA Ø 1,0 mm up to 10,0 mm x 0,5 mm
home
BETA 1370 Engineer's Hammer 400x155mm German Type with Wooden Shaft-German-type hammers for mechanical wood handles.
home
PPFERD Coated Abrasives Short Belts Ceramic Oxide Grain CO-COOL G80 9 x 305 mmFor aggressive grinding with the highest stock removal rates on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL
