KRAFFT 50kg Lubekrafft KEP 2GF Lube
Available
KF46848
Anhydrous calcium grease for very low temperatures (NLGI 2).
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference KF46848 | |||||
KRAFFT 50kg Lubekrafft KEP 2GF Lube |
|||||
|
DescriptionAnhydrous calcium grease for very low temperatures (NLGI 2). |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
spare-parts
BRAÇADEIRA DE LAMIN.
aco-38-hrc-afiacao-de-ferramentas
MO MONTADA 703 6AR 100 MO V
countersinker-din-335-c-90-hss
Taper And Deburring Countersinks DIN 335 Type C 90º HSS (Ø10,0mm) RUKO
chaves-de-caixa-e-acessorios
CHEMITOOL TOOLS Round Brush Black Bristle Wood Handle Nº18- Available in black.
- Nickel Steel Straw.
- Handle in Polished Wood.
- Nickel Steel Straw.
- Handle in Polished Wood.
din-912-parafuso-cabeca-cilindrica
CHEMITOOL FASTENERS Hexagon Cap Screw Cylindrical Head DIN 912 M5X45 12.9 Plain- Hexagon Cap Screw Cylindrical Plain;
- DIN 912;
- Material: 12.9;
- Finishing: Plain.
- DIN 912;
- Material: 12.9;
- Finishing: Plain.
home
KING TONY 1T Articulated and Reversible Two-Jaw Gear Puller-Puller with 3 claws used to pull out pulleys, bushings and bearings.
vedacoes-e-cercas
VEDAÇAO/CERCA
din-916-perno-sextavado-interior-concavo
CHEMITOOL FASTENERS Hexagon Set Screw Cup Point DIN 916 M5X6 45H White Zinc...- Hexagon Set Screw Cup Point White Zinc plated;
- DIN 916 / ISO 4029;
- Material: 45H;
- Acabamento: White Zinc plated.
- DIN 916 / ISO 4029;
- Material: 45H;
- Acabamento: White Zinc plated.
home
STARRETT Magnetic Base with Flex-O-Post Rod- Flex-O-Post.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
