CHEMITOOL WELDING Medium Tip

home

RIDGID Spiral Sawtooth Cutter, 1 1⁄2' (45 mm) Model T-109

Available

din-933-parafuso-sextavado-rosca-total

CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M10X40 A2...

- Hexagon Head Bolt Partial Thread Passivated Stainless Steel;
- DIN 931;
- Material: A2;
- Finishing: Passivated Stainless Steel.

Available

home

21-20-101 COLUNA

Available

din-975-varao-roscado-1m

CHEMITOOL FASTENERS Threaded Rod - 1m DIN 975 M27 4.8 Plain

- Threaded Rod - 1m Plain;
- DIN 975;
- Material: 4.8;
- Finishing: Plain.

Available

escovas-e-catrabuchas

PFERD Knotted Cup Brush with Thread Ø100mm M14 DIA

- Better on uneven surfaces;
- Diamond stainless steel for high resistance;
- Withstands up to 450 °C.

Available

home

Set of 75 Drill and Screwdriver Parts RYOBI

Available

home

Reductor 20x16x1.5: disco 1,7-2,2mm

Available

din-571-parafuso-cabeca-sextavada

CHEMITOOL FASTENERS Hexagonal Head Choach Screw DIN 571 7X80 4.8 White Zinc...

- Hexagonal Head Choach Screw White Zinc plated;
- DIN 571;
- Material: 4.8;
- Finishing: White Zinc plated.

Available

twist-drill-din-340-n-hss-g

IRWIN Bit HSS PRO with Conical Stem - DIN 345 Ø21,5x248 mm

- The series of conical shank Bits with Morse taper DIN 345 are standard heavy duty Bits that are used with stationary Bits. Designed for a high resistance to breakage;
- Manufactured according to DIN 345 standards;
- Tip of the chisel of 118 °;
- Design of conical rod with morse;
- Surface finish in black oxide.

Available

catrabucha-circular-arame-entrancado

CHEMITOOL PROBRUSH Crimped Brass Steel Cup Brush With Shaft 50mm

- 0,5mm crimped steel;
- Available in 50 and 75mm diameter;
- Fine finish;
- Ideal for flat and corners;
- High profitability;
- Long tool life.

Available

twist-drill-din-338-n-hss-g

RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 6,80mm)

- Main application Steel (N / mm²) <900 and cast iron

- Secondary application Brass and bronze

Available

home

DASSY Monza Two-Tone Work Shorts n.º 44 +/- 245 g/m² Black/Grey

'- Two-tone shorts with holster pockets.
- Strong fabric. Practical holster pockets. These short work trousers are up to any job. No matter what the temperature is.
- PESCO 61, +/- 245 G / M²

Available

sds-max-concrete-hammer-drill-4-cutters

BROCA SDS MAX 38,0X570

Available

home

Back ring 12 x 20 x 1.9

Available

home

IRWIN 20x400/540mm Speed Hammer C4 MAX Drill Bit

This is a carbide hammer drill with 4 cutting edges for machines with SDS-max adjustment. The X-shaped carbide head with 4 cutting edges provides good results and minimizes irregularities in the drilled hole.

Available