BOB.CORRENTE AÇO ZIN 10X50MM-14MT
Ready to Ship
CDBGZ10
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference CDBGZ10 | |||||
BOB.CORRENTE AÇO ZIN 10X50MM-14MT |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
home
DASSY Dakota Flame Retardant Brace Overall n.º 42 +/- 340 g/m² Grey'- Flame retardant brace overall with knee pockets
- The DASSY flame retardant workwear does not only have a flame retardant finish, but also meets all design requirements for this type of workwear. For instance, all pockets have flaps or are placed under a specific angle to prevent sparks from falling into the pockets. Moreover, all metal components (e.g. snap fastenings, zippers) are concealed, both on the outside and inside, to avoid heat transfer.
- CO 73, +/- 340 g/m²
- The DASSY flame retardant workwear does not only have a flame retardant finish, but also meets all design requirements for this type of workwear. For instance, all pockets have flaps or are placed under a specific angle to prevent sparks from falling into the pockets. Moreover, all metal components (e.g. snap fastenings, zippers) are concealed, both on the outside and inside, to avoid heat transfer.
- CO 73, +/- 340 g/m²
lixadora-de-tubo-redondo
LIXADORA DE TUBOS / ACABAMENTOS
fasteners-and-fixings
CHEMITOOL FASTENERS Slotted Cheese Head Screw DIN 84 M8X12 4.8 Plain
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M10X100 A2...- Hexagon Head Bolt Screw Full Thread Passivated Stainless Steel;
- DIN 933;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 933;
- Material: A2;
- Finishing: Passivated Stainless Steel.
disco-de-lamelas-dobradas-para-inox
10 DeWalt Flap Disc Angled 125xG80- Tough Zirconia Grain with Fine Crystals allow for Tough Stock Removal of Metal.
twist-auger-chrome-vanadium
Broca pua com ponta de centrar
din-7991-parafuso-cabeca-de-embeber
CHEMITOOL FASTENERS Hexagon Socket Cap Screw Countersunk Head DIN 7991...- Hexagon Socket Cap Screw Countersunk Head Plain;
- DIN 7991;
- Material: 10.9;
- Finishing: Plain.
- DIN 7991;
- Material: 10.9;
- Finishing: Plain.
disco-de-corte-metal-estacionario
PFERD Cut-Off Wheels Performance SG, 80 m/s, Flat Type T (Shape 41) 80 T...- Tool of hardness L, which cuts very easily, with two outer fabrics for steel and stainless steel (INOX).
- For cutting work that requires high stability.
- Materials that can be worked: steel, stainless steel (INOX).
- Applications: cutting of solid material, sections and pipes.
- Abrasive: Aluminium oxide A.
- For cutting work that requires high stability.
- Materials that can be worked: steel, stainless steel (INOX).
- Applications: cutting of solid material, sections and pipes.
- Abrasive: Aluminium oxide A.
din-582-olhal-de-carga-femea
CHEMITOOL FASTENERS Lifting Eye Nut DIN 582 M8 A2 Passivated Stainless Steel- Lifting Eye Nut Passivated Stainless Steel;
- DIN 582;
- Material: A2;
- Finishing: Passivated Stainless Steel.
- DIN 582;
- Material: A2;
- Finishing: Passivated Stainless Steel.